03-14-2024, 05:47 AM | #1 |
New Member
3
Rep 25
Posts |
Any Tool32 Experts?????
Hi,
I'm trying to do the DIY Carplay activation. I have found and changed the VIN in the HU, using E-sys to one from a 2020 F39 with S6CP But as I go in to Tool32 to do the provisioning Tool32 is not talking to the car. Can anyone offer any advice on Tool32 connection settings with E-net? TIA I have also posted this in F39 Forum |
03-14-2024, 06:10 AM | #2 | |
Captain
276
Rep 869
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Quote:
__________________
Retrofits done: 2TB, 235, 313, 430 459, 508, 5DP, 322, 674 , 6CP
Other mods: Central Locking button on both sides Other info: F48 Fuseguide, CarPlay 6CP - OEM way |
|
Appreciate
0
|
03-14-2024, 06:55 AM | #4 |
Captain
276
Rep 869
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Ok, thats's good. All other things are correct aswell? internet adapters, firewall ETc? You get a VIN in e-sys and/or ISTA?
Disable any non-used network adapters in device manager, these can ruin things for tool32. Edit: You can also get EasyConnect from here; , see link to software pack in description, using easy connect you can setup tool32/EDIABAS easier.
__________________
Retrofits done: 2TB, 235, 313, 430 459, 508, 5DP, 322, 674 , 6CP
Other mods: Central Locking button on both sides Other info: F48 Fuseguide, CarPlay 6CP - OEM way Last edited by mrpingu; 03-14-2024 at 07:09 AM.. |
Appreciate
0
|
03-14-2024, 07:17 AM | #5 |
New Member
3
Rep 25
Posts |
Firewall off, all other networks disabled. I get the message IFH-0018 initialization error message when I try to select enaevo.prg in Tool32.
I don't have connection manager so thanks for link, will try that |
Appreciate
0
|
03-14-2024, 07:54 AM | #6 | |
Captain
276
Rep 869
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Quote:
Pretty sure it is wrongly configured connection settings.
__________________
Retrofits done: 2TB, 235, 313, 430 459, 508, 5DP, 322, 674 , 6CP
Other mods: Central Locking button on both sides Other info: F48 Fuseguide, CarPlay 6CP - OEM way |
|
Appreciate
0
|
03-14-2024, 08:10 AM | #8 |
New Member
3
Rep 25
Posts |
And, yes, sorry, connects and codes with E-Sys with no problems
I have coded new VIN to HU and coded mirrors to fold on lock instead of 3 second delay |
Appreciate
0
|
03-14-2024, 10:16 AM | #9 | |
Captain
276
Rep 869
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Quote:
You could read out IP-adress from E-sys, then use it to configure EDIABAS to force it to connect to 1 specific IP.
__________________
Retrofits done: 2TB, 235, 313, 430 459, 508, 5DP, 322, 674 , 6CP
Other mods: Central Locking button on both sides Other info: F48 Fuseguide, CarPlay 6CP - OEM way |
|
Appreciate
1
davetcollection3.00 |
Post Reply |
Bookmarks |
|
|