02-24-2021, 10:14 AM | #23 |
Captain
678
Rep 910
Posts |
It will need to be coded, unfortunately the relevant parameters do not appear to be showing on Bimmercode, it should be able to be done with E-sys.
|
Appreciate
0
|
02-24-2021, 12:07 PM | #24 |
Second Lieutenant
47
Rep 231
Posts |
My fully optioned 2018 X1 which itself is different than the US models (thicker glass, kms instead of MPH etc) also has the switch on the passenger side. I didn't have to order it as it was a dealer stock and thus it was a lot less expensive than a custom order.
|
Appreciate
0
|
02-24-2021, 03:37 PM | #25 |
Second Lieutenant
68
Rep 240
Posts |
|
Appreciate
0
|
02-24-2021, 03:41 PM | #26 | |
Second Lieutenant
68
Rep 240
Posts |
Quote:
|
|
Appreciate
0
|
02-26-2021, 03:23 AM | #27 | |
Captain
678
Rep 910
Posts |
Quote:
Final thought, did you actually check the pins on the connector/cable for passenger door switch. I know you said it illuminates so is receiving power but useful to check if it is same as driver door connections (if you have time you may wish to try driver door switch on passenger side and your new switch on driver door - they should plug in but will obviously not fit in door itself). Best wishes Last edited by MJE60; 02-26-2021 at 03:52 AM.. |
|
Appreciate
0
|
02-26-2021, 02:30 PM | #28 | |
Second Lieutenant
68
Rep 240
Posts |
Quote:
I'll try first with bimmercode, seems more handy for me. I'll post here my findings as soon as I will have something new. Btw, I hope to join the G01 forum too by the end of the year. 😉 |
|
Appreciate
1
MJE60678.00 |
03-05-2021, 12:40 AM | #29 |
Registered
0
Rep 1
Posts |
|
Appreciate
0
|
03-05-2021, 11:35 PM | #30 | |
Private First Class
76
Rep 155
Posts |
Quote:
|
|
Appreciate
1
MJE60678.00 |
03-06-2021, 08:57 AM | #31 |
Second Lieutenant
68
Rep 240
Posts |
|
Appreciate
0
|
03-06-2021, 12:29 PM | #32 |
Private First Class
18
Rep 104
Posts |
Looking at the Demo mode of Bimmer Code's latest release you can set the doors to automatically unlock when you turn off the key.
I have yet to purchase the full version and dive into it. The VEEPEAK OBD-II Scan Tool just arrived. |
Appreciate
0
|
03-06-2021, 06:18 PM | #33 |
Private First Class
76
Rep 155
Posts |
I checked on my X2 today and I did not find anything with "zentral" in BDC or HU. Sorry
Perhaps, you can ask in this thread, I saw some pretty knowledgeable people in there who can help or guide you https://f48.bimmerpost.com/forums/sh....php?t=1222484 |
Appreciate
0
|
05-16-2021, 04:15 PM | #34 | |
Second Lieutenant
68
Rep 240
Posts |
Quote:
|
|
Appreciate
0
|
11-10-2021, 09:47 PM | #35 |
Registered
0
Rep 2
Posts |
Hello StefanJ, I'm trying to fix the central locking switch on my X1, it got jammed in somehow. I can't find a procedure in my tech manual. Can you please tell me how you accessed the switch? Did you remove the entire inner door panel, or just the trim around the switch? Thanks very much.
|
Appreciate
0
|
06-23-2023, 06:30 AM | #36 |
New Member
0
Rep 17
Posts |
I’m at the same situation, O bought the uk door switch, connected, and not works, only have light….,anyone found a solution? I also have BimmerCode, but not esys…
|
Appreciate
0
|
12-19-2023, 09:13 PM | #37 |
Private
3
Rep 64
Posts |
Looking at this topic made me think of the times I learn about relay controls. The basic NO and NC ; normally close, normally open.
When you have different switch command to a same contact point you can use one relay to control them. Provided there is already an LED light 12V supply to the relay. Perhaps you can explain the situation to a knowledgeable shop owner that sells relays and provide the solution for your 2 switches to a central lock command. |
Appreciate
0
|
01-03-2024, 07:15 AM | #38 |
New Member
0
Rep 17
Posts |
Finally some info! many thanks, I will ask as you say. Then as the Canada Cars come with both buttons, maybe it's not only a thing of coding? maybe this cars comes with a relay or other thing for work with both buttons?
|
Appreciate
0
|
01-03-2024, 09:03 AM | #39 | |
Captain
191
Rep 641
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Quote:
EDIT: Also I found the coding parameter All locking related coding is in the CLIntegration group (3041) Two relevant parameters are CLI_CLW_DRD_ASSEMBLED comment=Centerlock rocker switch driver door assembledcenterlock rocker driver's door installed CLI_CLW_PSD_ASSEMBLED comment= Centerlock rocker switch passenger door assembledcenterlock rocker passenger door installed Last edited by mrpingu; 01-03-2024 at 09:23 AM.. |
|
Appreciate
1
wcruzeiro29.00 |
01-25-2024, 09:49 AM | #40 | |
New Member
0
Rep 17
Posts |
Quote:
Tried a day after and nothing...., not work, maybe I need to check the BDC points, but i don't know where is BDC and if the button have light, is strange that BMW only connected cables for light and not the other cables? Last edited by isiarj20; 01-26-2024 at 02:57 AM.. |
|
Appreciate
0
|
01-26-2024, 04:10 PM | #41 | |
Captain
191
Rep 641
Posts
Drives: 2018 F48 X1 xDrive 18D
Join Date: Nov 2022
Location: Norway
|
Quote:
Look for Door connector PIN 18 and PIN 11 BDC A258*2b PIN 29 Attached 2 pictures: 1. connector view of the door connector so you can easier see where pin 18 and 11 eleven should be 2. Location of BDC See this video for introduction to BMW BDC pin system at 3m48s: |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|