[Ronnyt27]

hi all, i'm new to coding. i'm getting the psdz error 433, when tried to read the SVT. any work around please?

i have the 2019 F48

[mrpingu]

Originally Posted by Ronnyt27

hi all, i'm new to coding. i'm getting the psdz error 433, when tried to read the SVT. any work around please?

i have the 2019 F48

Use "read ECU" on BMW x1 F48 using F056 profile

[Ronnyt27]

read ECU, the HU_ENTRYNAV is red, couldn't code nor do anything though. can you walk me through this please?

[mrpingu]

Originally Posted by Ronnyt27

read ECU, the HU_ENTRYNAV is red, couldn't code nor do anything though. can you walk me through this please?

Red means, couldn't find that ECU / ECU Not Connected.

Do you have any errors or symptoms and what are you trying to do?

[limsheng]

Hi, back to some coding learning after some time. Still trying to figure out coding 2VB for RDC. Wanna ask your existing value for BDC body is same as mine ?

[mrpingu]

Originally Posted by limsheng

Hi, back to some coding learning after some time. Still trying to figure out coding 2VB for RDC. Wanna ask your existing value for BDC body is same as mine ?

Wert_07 [07]

Why don’t you calculate correct value using SVT compare with your SVT and your FA?

[limsheng]

Originally Posted by mrpingu

Wert_07 [07]

Why don’t you calculate correct value using SVT compare with your SVT and your FA?

Yes already compared and coded all the values but just trying out if I missed something. Just went to workshop they checked all my sensors were active. But it still stopped at 49%

[mrpingu]

Originally Posted by limsheng

Yes already compared and coded all the values but just trying out if I missed something. Just went to workshop they checked all my sensors were active. But it still stopped at 49%

Which ECUs did you code? Need to code HU, DSC, BDC and KOMBI. Did you write VO to the car?

[limsheng]

Saved the 2VB option and carried out the fdl coding.
I’ve actually tried 2 methods. The smart code on BU itself.
And then tried the NCD code from e-sys
Of course the “old” and “new” are just vice versa

[limsheng]

I’m wondering if bmw only accepts certain ID on the tpms sensors? It would be easy if only I can register the 4 IDs into receiver module lol.

[X1604M]

Originally Posted by limsheng

I’m wondering if bmw only accepts certain ID on the tpms sensors? It would be easy if only I can register the 4 IDs into receiver module lol.

I believe you are trying to add 2VB option. My F48 is Canadian version which does not required to have TPMS Sensors by law in Canada so BMW never installed them at that time. But I found out after some research it has all the required hardware onboard.

I just added 2VB option using Esys by using the VO coding method. Right after adding 2VB I drove around for about 20 minutes and everything showed up.

I just bought 4 TPMS from AliExpress for total 51C$ and have them installed. Nothing had to be done. They lasted about 3 years.