FS: Eibach Sway Bars, Angel Eyes, Quad Diffuser and custom exhaust

[JefryHorizon]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

So this is what I have left for pick up guys. At the end of September, if anything else is still around I will be shipping to members who have contacted me previously via PM.

- Alpine HID V3 Angel Eyes with 7000k bulbs and pre-drilled caps for 1 Series headlights. These will make your halos look as bright during they day as the stock ones at night. $150 OBO
http://www.alpinemss.com/product_p/hidan.htm

A few comparison pictures: http://www.m3post.com/forums/showthread.php?t=750367



- Eibach Front and Rear sway bars slightly thicker than stock M3 front and rear $250 OBO



- JL Motoring CF OEM Quad Diffuser less than 3k miles, practically flawless condition (yes I know its upside down, the picture is for the sake of its current condition) $300 OBO ===> http://www.jl-motoring.com/BMW_E82_E...p/bmdi8201.htm


- Custom exhaust with 2 resonators. Stock BMW and Magnaflow. High RPM straight pipe race car I6TT sound without the insane drone, I'd say borderline "street" sounding setup. Includes all mounts. Spent quite a while to get the exact sound I wanted. Asking for $250 OBO for everything pictured below.


- Corbeau Harness as pictured $60 OBO



LOCAL PICK UP IN SOCAL ONLY UNTIL 10/1/12

[HiI'mDustin]

If u will ship the LUX let me know I will paypal today

[ShocknAwe]

Got a sound clip of the exhaust?

[STEP2ME]

If you're willing to ship the sway bars now i'll take them off your hands, funds ready to go.

[JefryHorizon]

Originally Posted by HiI'mDustin

If u will ship the LUX let me know I will paypal today

I apologize for the misunderstanding. These are not LUX they're alpine.

[///135i]

Originally Posted by JefryHorizon

So this is what I have left for pick up guys. At the end of September, if anything else is still around I will be shipping to members who have contacted me previously via PM.

- Alpine HID V3 Angel Eyes with 7000k bulbs and pre-drilled caps for 1 Series headlights. These will make your halos look as bright during they day as the stock ones at night. $150 OBO
http://www.alpinemss.com/product_p/hidan.htm


- Eibach Front and Rear sway bars slightly thicker than stock M3 front and rear $250 OBO



- JL Motoring CF OEM Quad Diffuser less than 3k miles, practically flawless condition (yes I know its upside down, the picture is for the sake of its current condition) $300 OBO ===> http://www.jl-motoring.com/BMW_E82_E...p/bmdi8201.htm


- Custom exhaust with 2 resonators. Stock BMW and Magnaflow. High RPM straight pipe race car I6TT sound without the insane drone, I'd say borderline "street" sounding setup. Includes all mounts. Spent quite a while to get the exact sound I wanted. Asking for $250 OBO for everything pictured below.


- Corbeau Harness as pictured $60 OBO



LOCAL PICK UP IN SOCAL ONLY UNTIL 10/1/12

Hey buddy you still have the harness?

[Jcrewsn]

Interested in the angel eyes. pm sent

[JefryHorizon]

Originally Posted by ///135i

Hey buddy you still have the harness?

Yep still here. However I have a few guys requesting to ship since day 1 so they will take priority.

[///135i]

Originally Posted by JefryHorizon

Yep still here. However I have a few guys requesting to ship since day 1 so they will take priority.

Okay buddy, if they fall through let me know, I'm paypal ready.

[JefryHorizon]

Inbox clear

[WhiteTgr135i]

You see any difference in terms of handling / steering input / body roll with the front and rear sway bars?

[JefryHorizon]

Originally Posted by Tycho

You see any difference in terms of handling / steering input / body roll with the front and rear sway bars?

When everything was stock. Yes, but not as much as you'd expect.

I had low front springs and stock end-links installed with the front sway. There was very little body roll on the front end when cornering, felt like a completely different car but way too stiff for daily driving. I had around a 2" drop in the front which also added to the tension on the sway bar.

[WhiteTgr135i]

Do you know what "mm" are the front and rear sways?

[JefryHorizon]

Originally Posted by Tycho

Do you know what "mm" are the front and rear sways?

They're the same thickness at M3 sway bars.

[WhiteTgr135i]

But you stated they are a little thicker than the stock M3 sways in your OP.

Originally Posted by JefryHorizon

They're the same thickness at M3 sway bars.

[Bdh821]

Originally Posted by Tycho

But you stated they are a little thicker than the stock M3 sways in your OP.

I'm pretty sure he means the wall thickness of the bar is thicker (since they are hallow), but the OD of the bar is the same as a stock M3 bar. so 26.5MM

[WhiteTgr135i]

Ah, makes sense, thanks for clearing that up!

[INDPNDT]

What quad did you use? Or did you just run a dual exhaust with a quad diffuser?

[JefryHorizon]

Originally Posted by Bdh821

I'm pretty sure he means the wall thickness of the bar is thicker (since they are hallow), but the OD of the bar is the same as a stock M3 bar. so 26.5MM

Thanks for clearing that up, you may also check on the serials for exact specifications from Eibach.

Originally Posted by INDPNDT

What quad did you use? Or did you just run a dual exhaust with a quad diffuser?

It was a normal setup with fake tips that looked like quads.