▀▄ eas | Challenge line of X Pipes for e9x M3 *NEW 2011 PRICE!*

EAS · 01-04-2011, 11:13 AM

Gentlemen,

As an authorized dealer for Challenge, we are proud to announce that Challenge have just adjusted the prices on their line of X Pipes for 2011! The Challenge X Pipes will be the new standard in workmanship and performance for your e9x M3.

Street - OEM Catalysts
The Challenge Street X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, and a precision fabricated X section. This pipe slip fits after your OEM cats, for easy installation with NO check engine lights! Best of all, no exhaust smell to alert the law at inspection. All bolts, gaskets, and stainless clamps necessary for install are included.

Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone reduction
- Retains factory primary cats
- No check engine light
- Flanged design for easy installation and upgrade options
- 10 wheel hp and 15 ft tq gains with factory exhaust
- Increased low end power

Challenge - Stainless Steel X-Pipe Street (OEM Catalysts) - e9x M3

Race - Catless
The Challenge Sports X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, and a precision fabricated X section. This is a full bolt on solution that connects directly to the OEM header flange. All bolts, gaskets, and stainless clamps necessary for install are included. ECU reflash or CEL deleter is required to turn off the check engine light

Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone reduction
- Full bolt on installation

Challenge - Stainless Steel X-Pipe Race (Catless) - e9x M3

Sports - High Flow Catalysts
The Challenge Sports X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, 200 cel High flow metallic race Catalysts, and a precision fabricated X section. This is a full bolt on solution that connects directly to the OEM header flange. All bolts, gaskets, and stainless clamps necessary for install are included. Get all the performance gains without the exhaust smell! ECU reflash or CEL deleter is required to turn off the check engine light

Features:
- Made in the USA
- Full stainless steel construction
- Laser cut and formed mounting brackets
- 2.5 in Piping
- Twin resonators for noise and drone reduction
- Full bolt on installation

Challenge - Stainless Steel X-Pipe Sports (High Flow Catalysts) - e9x M3

Forum Members:
Contact any of the EAS Staff for forum pricing!

SoCal Locals:
We didn't forget about you, give us a call for installation specials!

Ordering:
Phone:
You can reach us directly by calling 866.669.0705 to place your order over the phone.

Payment:
Credit/Debit Cards: Visa, Mastercard, Discover, PayPal, Google Checkout (available online & over phone)

Other Payments:
Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.

Tax:
All CA customers will be charged 8.75% CA Sales tax.

Shipping:
All orders will be shipping via UPS. If you are interested in shipping to Hawaii, Alaska, or internationally, please contact us directly, as you will be charged additional shipping fees.

Hours of Operations:
Monday - Friday from 9AM to 5PM PST
Saturday/Sunday - Closed

Retail Location/ Installation Center:
Come check out our 8000 square foot facility in Anaheim, CA. We install everything we sell.

Contact Info:
Phone: 866.669.0705 x27
Email: david@europeanautosource.com
Website: http://www.europeanautosource.com

Feel free to contact me via PM, email, or phone if you have any questions.

Tim B. · 01-06-2011, 11:14 PM

PM a price on the Street version shipped to 70769 please.

EAS · 01-07-2011, 04:12 PM

Quote:

Originally Posted by Tim B.

PM a price on the Street version shipped to 70769 please.

PM on the way

EAS · 01-11-2011, 05:20 PM

Got a few more X-Pipes in stock!

EAS · 01-19-2011, 05:58 PM

All PMs have been replied!

saeedg48 · 01-19-2011, 06:24 PM

bump for a sick system

EAS · 01-28-2011, 12:11 PM

Arqray exhaust paired up with the Challenge X-Pipe:

w00tw00t · 02-05-2011, 03:33 PM

Is there a performance benefit to going completely catless (race version)... I am researching xpipes and am debating race(+CEL Delete) vs sport.

I dont care about emissions as in WA I won't need to go for emissions testing as 2009 or newer cars are exempt..

gixxer_kidd · 02-07-2011, 07:21 AM

Quote:

Originally Posted by w00tw00t

Is there a performance benefit to going completely catless (race version)... I am researching xpipes and am debating race(+CEL Delete) vs sport.

Would like to know the same. Any performance difference between sport and race?

EAS · 02-07-2011, 11:28 AM

Quote:

Originally Posted by w00tw00t

Is there a performance benefit to going completely catless (race version)... I am researching xpipes and am debating race(+CEL Delete) vs sport.

I dont care about emissions as in WA I won't need to go for emissions testing as 2009 or newer cars are exempt..

Quote:

Originally Posted by gixxer_kidd

Would like to know the same. Any performance difference between sport and race?

There is definitely a performance benefit to going completely catless since you remove all restrictions of exhaust flow, thus providing the most power gain along with a noticeably more aggressive exhaust note. The reason why most people would prefer the version with HFCs is due to the fact that many states require catalytic converters for street use, and catless cars have to be off road use only.

CT-Bimmer · 02-07-2011, 11:51 AM

Price of Street version shipped to 06825. Thanks!

Mike

Grail05 · 02-08-2011, 12:15 PM

David: can you pm me a price on sport and race..

shuggy · 02-08-2011, 03:53 PM

I reside in CA. Will the Street and/or Sport pass emissions in CA w/o having to take them off? Please PM w/ pricing including installation.

Thanks!

EAS · 02-08-2011, 04:52 PM

Quote:

Originally Posted by Sean05

David: can you pm me a price on sport and race..

Quote:

Originally Posted by shuggy

I reside in CA. Will the Street and/or Sport pass emissions in CA w/o having to take them off? Please PM w/ pricing including installation.

Thanks!

PMs on the way

djsueno · 02-08-2011, 07:19 PM

Does the street version require cutting or is it bolt on? I'm really curious how this would sound with my Dinan axle-back system. PM me please.

EAS · 02-09-2011, 12:26 PM

Quote:

Originally Posted by djsueno

Does the street version require cutting or is it bolt on? I'm really curious how this would sound with my Dinan axle-back system. PM me please.

PM sent.

hova00 · 02-13-2011, 05:55 PM

Quote:

Originally Posted by djsueno

Does the street version require cutting or is it bolt on? I'm really curious how this would sound with my Dinan axle-back system. PM me please.

Iam also curious about this. Please let me know?

tom @ eas · 02-13-2011, 09:43 PM

Quote:

Originally Posted by djsueno

Does the street version require cutting or is it bolt on? I'm really curious how this would sound with my Dinan axle-back system. PM me please.

Quote:

Originally Posted by hova00

Iam also curious about this. Please let me know?

The Street version is considered a "cut and clamp" due to the design of the OEM exhaust. The Race or Sports are bolt-on systems.

There's nothing to worry about on the Street system as the stock x-pipe can easily be reinstalled by any muffler shop if looking to return to stock.

EAS · 02-15-2011, 05:59 PM

All PMs have been replied

EAS · 03-11-2011, 05:14 PM

We've still got a couple of the Race X-pipes available!

REP1KRR · 03-12-2011, 02:24 PM

Quote:

Originally Posted by david @ eas

We've still got a couple of the Race X-pipes available!

Price please. Dyno reading available? What's power gain on catless and HFC?

AMPowerJ · 03-14-2011, 06:39 AM

PM pricing please for the sport version.

01-04-2011, 11:13 AM	#1
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	▀▄ eas \| Challenge line of X Pipes for e9x M3 NEW 2011 PRICE! Gentlemen, As an authorized dealer for Challenge, we are proud to announce that Challenge have just adjusted the prices on their line of X Pipes for 2011! The Challenge X Pipes will be the new standard in workmanship and performance for your e9x M3. Street - OEM Catalysts The Challenge Street X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, and a precision fabricated X section. This pipe slip fits after your OEM cats, for easy installation with NO check engine lights! Best of all, no exhaust smell to alert the law at inspection. All bolts, gaskets, and stainless clamps necessary for install are included. Features: - Made in the USA - Full stainless steel construction - Laser cut and formed mounting brackets - 2.5 in Piping - Twin resonators for noise and drone reduction - Retains factory primary cats - No check engine light - Flanged design for easy installation and upgrade options - 10 wheel hp and 15 ft tq gains with factory exhaust - Increased low end power Challenge - Stainless Steel X-Pipe Street (OEM Catalysts) - e9x M3 Race - Catless The Challenge Sports X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, and a precision fabricated X section. This is a full bolt on solution that connects directly to the OEM header flange. All bolts, gaskets, and stainless clamps necessary for install are included. ECU reflash or CEL deleter is required to turn off the check engine light Features: - Made in the USA - Full stainless steel construction - Laser cut and formed mounting brackets - 2.5 in Piping - Twin resonators for noise and drone reduction - Full bolt on installation Challenge - Stainless Steel X-Pipe Race (Catless) - e9x M3 Sports - High Flow Catalysts The Challenge Sports X Pipe features 304 stainless steel piping and flanges, twin high flow resonators, 200 cel High flow metallic race Catalysts, and a precision fabricated X section. This is a full bolt on solution that connects directly to the OEM header flange. All bolts, gaskets, and stainless clamps necessary for install are included. Get all the performance gains without the exhaust smell! ECU reflash or CEL deleter is required to turn off the check engine light Features: - Made in the USA - Full stainless steel construction - Laser cut and formed mounting brackets - 2.5 in Piping - Twin resonators for noise and drone reduction - Full bolt on installation Challenge - Stainless Steel X-Pipe Sports (High Flow Catalysts) - e9x M3 Forum Members: Contact any of the EAS Staff for forum pricing! SoCal Locals: We didn't forget about you, give us a call for installation specials! Ordering: Phone: You can reach us directly by calling 866.669.0705 to place your order over the phone. Payment: Credit/Debit Cards: Visa, Mastercard, Discover, PayPal, Google Checkout (available online & over phone) Other Payments: Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods. Tax: All CA customers will be charged 8.75% CA Sales tax. Shipping: All orders will be shipping via UPS. If you are interested in shipping to Hawaii, Alaska, or internationally, please contact us directly, as you will be charged additional shipping fees. Hours of Operations: Monday - Friday from 9AM to 5PM PST Saturday/Sunday - Closed Retail Location/ Installation Center: Come check out our 8000 square foot facility in Anaheim, CA. We install everything we sell. Contact Info: Phone: 866.669.0705 x27 Email: david@europeanautosource.com Website: http://www.europeanautosource.com Feel free to contact me via PM, email, or phone if you have any questions.
	Appreciate 0 Tweet Quote

01-06-2011, 11:14 PM	#2
Tim B. Lieutenant 19 Rep 561 Posts Drives: 2010 Jet Black E92 M3 Join Date: Dec 2009 Location: Baton Rouge, LA iTrader: (0)	PM a price on the Street version shipped to 70769 please.
	Appreciate 0 Quote

01-11-2011, 05:20 PM	#4
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	Got a few more X-Pipes in stock!
	Appreciate 0 Quote

01-19-2011, 05:58 PM	#5
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	All PMs have been replied!
	Appreciate 0 Quote

01-19-2011, 06:24 PM	#6
saeedg48 Brigadier General 342 Rep 3,574 Posts Drives: Porsche 991.1 GT3 Join Date: Nov 2008 Location: Newport Beach, CA iTrader: (1)	bump for a sick system __________________ 2015 Porsche 991.1 GT3 2015 F80 M3 -- Individual; Space Grey
	Appreciate 0 Quote

01-28-2011, 12:11 PM	#7
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	Arqray exhaust paired up with the Challenge X-Pipe:
	Appreciate 0 Quote

02-05-2011, 03:33 PM	#8
w00tw00t Colonel 408 Rep 2,171 Posts Drives: 2016 MW M4 Join Date: Oct 2010 Location: San Jose, CA iTrader: (13)	Is there a performance benefit to going completely catless (race version)... I am researching xpipes and am debating race(+CEL Delete) vs sport. I dont care about emissions as in WA I won't need to go for emissions testing as 2009 or newer cars are exempt.. Last edited by w00tw00t; 02-05-2011 at 03:47 PM..
	Appreciate 0 Quote

02-07-2011, 11:51 AM	#11
CT-Bimmer Private First Class 23 Rep 142 Posts Drives: 2008 BMW M3 Sedan Join Date: Nov 2008 Location: CT iTrader: (0)	Price of Street version shipped to 06825. Thanks! Mike __________________ *E90 M3 \| Jerez Black \| Black Novillo \| Carbon \| All options but sun shades* *Mods: Gintani CB \| Dinan Intake \| Evo Pulley \| HRE P40's \| Eibach Springs \| MS spacers \| Matte grills \| GP Thunder 7500 \| Venture Clear bra*
	Appreciate 0 Quote

02-08-2011, 12:15 PM	#12
Grail05 Putcha ang ganda... 281 Rep 5,441 Posts Drives: 17 F82 M4 Join Date: Feb 2010 Location: Los Angeles, Brea CA. iTrader: (10)	David: can you pm me a price on sport and race..
	Appreciate 0 Quote

02-08-2011, 03:53 PM	#13
shuggy Second Lieutenant 39 Rep 219 Posts Drives: '11 E90M3, '20 X3M, '20 RRSSVR Join Date: Apr 2010 Location: Los Angeles, CA iTrader: (2)	I reside in CA. Will the Street and/or Sport pass emissions in CA w/o having to take them off? Please PM w/ pricing including installation. Thanks!
	Appreciate 0 Quote

02-08-2011, 07:19 PM	#15
djsueno Lieutenant 40 Rep 569 Posts Drives: 2016 MW F80 M3 Join Date: Jul 2010 Location: Los Angeles CA iTrader: (16)	Does the street version require cutting or is it bolt on? I'm really curious how this would sound with my Dinan axle-back system. PM me please.
	Appreciate 0 Quote

02-15-2011, 05:59 PM	#19
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	All PMs have been replied
	Appreciate 0 Quote

03-11-2011, 05:14 PM	#20
EAS BimmerPost Supporting Vendor 548 Rep 5,695 Posts Drives: VF620 M3 Join Date: Mar 2010 Location: Anaheim, CA iTrader: (10)	We've still got a couple of the Race X-pipes available!
	Appreciate 0 Quote

03-14-2011, 06:39 AM	#22
AMPowerJ One mod leads to another ... 416 Rep 2,900 Posts Drives: 2014 F10 M5 Join Date: Apr 2008 Location: Blythewood, SC iTrader: (10)	PM pricing please for the sport version. __________________ Current: 2014 F10 M5 Previous: 2015 F80 M3, 2013 E92 M3, 2013 F10 M5, 2009 E90 M3, 1998 E36 M3
	Appreciate 0 Quote