Looking for Perfect Fitment at an Affordable Price

[Chan]

Are there any 20" wheels out there with standard offsets that provide an aggressive stance (i.e., flush with fenders) on the F82? I would prefer not to use spacers. Style wise I love the HRE R101LW and the P101 but I am trying not to spend $10K on wheels and tires. Any suggestions would be appreciated!

[Wah]

Originally Posted by Chan

Are there any 20" wheels out there with standard offsets that provide an aggressive stance (i.e., flush with fenders) on the F82? I would prefer not to use spacers. Style wise I love the HRE R101LW and the P101 but I am trying not to spend $10K on wheels and tires. Any suggestions would be appreciated!

Yes. PM sent! Talk to Signature Wheel BMW

[x.shell]

Originally Posted by Wah

Yes. PM sent! Talk to Signature Wheel BMW

I 2nd this. You can get custom sizes and offsets made to order. And it only takes about 4 weeks to get to your door.

[AutoTalent]

PUR SP04 or HRE FF04!

[mtr3s]

VS forged

[GERMAN M3]

Originally Posted by AutoTalent

PUR SP04 or HRE FF04!

Those FF04's look sweet!!

[WheelsBoutique]

Originally Posted by Wah

Yes. PM sent! Talk to Signature Wheel BMW

Where are Signature wheels manufactured?

[Ehloo]

They are made in Taiwan but you probably knew that already

Originally Posted by WheelsBoutique

Where are Signature wheels manufactured?

[Ehloo]

Try BC forged, starting price cheaper and made at same manufacturer Signature makes theirs. Back story behind the relationship

Originally Posted by Chan

Are there any 20" wheels out there with standard offsets that provide an aggressive stance (i.e., flush with fenders) on the F82? I would prefer not to use spacers. Style wise I love the HRE R101LW and the P101 but I am trying not to spend $10K on wheels and tires. Any suggestions would be appreciated!

[WheelsBoutique]

Originally Posted by Ehloo

They are made in Taiwan but you probably knew that already

Originally Posted by Ehloo

Try BC forged, starting price cheaper and made at same manufacturer Signature makes theirs. Back story behind the relationship

There was one person I had seen that mentioned they were made in China but I wasn't certain if that was accurate or not. After reading your response and googling it I can confirm it now.

[Encanto]

Originally Posted by mtr3s

VS forged

x2

[SupremePower1]

I love mine which are for sale!

DSC_0245 by

[swifty]

Originally Posted by GERMAN M3

Those FF04's look sweet!!

FF04 run offset of et43 on 11 inch rear. Not ideal for perfect fitment.

[WheelsBoutique]

Originally Posted by swifty

FF04 run offset of et43 on 11 inch rear. Not ideal for perfect fitment.

That's what HRE's custom forged offerings are for right?

[mtr3s]

Originally Posted by swifty

FF04 run offset of et43 on 11 inch rear. Not ideal for perfect fitment.

Not good fitment at all. Spacers will be needed.

[AutoTalent]

Originally Posted by mtr3s

Not good fitment at all. Spacers will be needed.

Are you thinking of the FF01 perhaps? Typical fitment for an 11" rear on this platform is +40 so +43 is still pretty flush.

[mtr3s]

Originally Posted by AutoTalent

Are you thinking of the FF01 perhaps? Typical fitment for an 11" rear on this platform is +40 so +43 is still pretty flush.

11 +40 is same as 10 +28
11 +43 is same as 10 +31 (9 mm spacer on stock)

You can do 11 +35 without modifications.

[x.shell]

Originally Posted by mtr3s

11 +40 is same as 10 +28
11 +43 is same as 10 +31 (9 mm spacer on stock)

You can do 11 +35 without modifications.

Depends on the tire and camber. I run 20x11 +36 with a 295/30/20 RE71R and -2.2 degrees of camber. There is a slight rub on full compression. The RE71R isn't the widest tire either; some tires will be wider at the same size.

I think a 20x11 +40 is a very good fitment if you want to run a 305 at -2.0 degrees of camber.

That being said everybody has different tastes when it comes to being "flushed" or "poked" but I think an 11" wheel with an offset of +40 is the perfect place to start.

It's obvious HRE wanted to cater to more tire choices when determining their FF wheels. They still look pretty darn good though and I would run them without spacers.

[swifty]

Originally Posted by AutoTalent

Are you thinking of the FF01 perhaps? Typical fitment for an 11" rear on this platform is +40 so +43 is still pretty flush.

I'm running et 40 on 11 inch and definitely could use a 3mm spacer if I wanted to be flush.

[elisiX]

So what is the best/right size in FF04 with PSS or PS4’s?

[LOW4LYF]

Running 11" et25 no issues at all. Always depending on the tire size, tire brand etc....

[4everkidd]

I couldn't be happier with my Signature Forged setup and i've run HRE and ADV.1 in the past... sidenote I won't ever run ADV.1 again