Wheel offset question for experts

[f8xdct]

Would 19x10 et20 fit rear? Im guessing it would be like stock plus 20mm spacer maybe.

[Encanto]

Yes; it can fit "hella flush" in the front as well.

Originally Posted by ///m.3

Would 19x10 et20 fit rear? Im guessing it would be like stock plus 20mm spacer maybe.

[x.shell]

Depends what tire you use. You're gonna have to stretch the tire and dial in as much negative camber as possible. Why are you considering that size for the rear?

[Encanto]

Originally Posted by ///m.3

Wheel only comes in that size

As exo-shell stated... a 20x10 ET20 wheel will fit nicely in the rear but it will limit the tire size.

[chrisx_xzb]

Have 20*11 et32 and 285 30 20 P0 on the rear! No problem

[Motodude310]

I found this to be an interesting read

https://www.apexraceparts.com/blog/f...11-et44-wheel/

[Encanto]

Originally Posted by ///m.3

275x30x19 as long as no stretch?

Correct, but 30 profile is low for a 19" and 275 in this car. 295/30-19 instead will keep the overall diameter within 3% of OEM.

Tire stretch is a matter or wheel width and tire size, not offset. Offset is overall "poke" or not.

[mtr3s]

Originally Posted by ///m.3

Would 19x10 et20 fit rear? Im guessing it would be like stock plus 20mm spacer maybe.

It will fit tight and you may need additional negative camber. You may have minor rubbing as well.