[Almaretto]

Originally Posted by paulosportz

Completely new here. Can I also please have the latest cheat sheet for my wifes my16 f48 x1. Thanks in advance!!

Use F015 Sheet.

[paulosportz]

Originally Posted by Almaretto

Use F015 Sheet.

Thanks! Did my first coding session yesterday and was surprised how simple it was after following the instructions the guys developed.

I am spewing that the video function does not work for my nav system.

[Almaretto]

Originally Posted by paulosportz

Thanks! Did my first coding session yesterday and was surprised how simple it was after following the instructions the guys developed.

I am spewing that the video function does not work for my nav system.

Well I guess you will have to drive your car and watch movies at home.

[paulosportz]

Anyone figure out how to get the fog lamps on with welcome lights?

I've tried 3063>Mapping_Nebelschw_l_part_of_wl>wert=01 and 3063>Mapping_Nebelschw_r_part_of_wl>wert=01 and it wont work?

[Almaretto]

Originally Posted by paulosportz

Anyone figure out how to get the fog lamps on with welcome lights?

I've tried 3063>Mapping_Nebelschw_l_part_of_wl>wert=01 and 3063>Mapping_Nebelschw_r_part_of_wl>wert=01 and it wont work?

That only works for F015/F016/F085/F086

[jpwakan]

Hi,

Is it possible to have cornering lights at any speed - above 70km/h
And to reduce steering wheel rotation to have them on.

Thanks

[kenY2681]

Hello everyone, this is my first post and will be first attempt to do some coding. Have a lot of materials to read up on before I go ahead =). I just installed a LED fog light and seeing the warm/cold flickering, hoping after I learn this I can turn the check off so the flicker will stop. Thank you in advance for the questions that will come as I am sure I will have questions.

[CS328Ci]

I'm trying to figure out how to code the seatbelt lights and sound off after my dealer updated the software on my wife's X1.

After the software update, I don't see the necessary fields to code the seatbelt warning off. It's not on the list of items under ACSM that were there prior to the update. Instead, all I see is "zuendkreis"

I'm running esys 3.27.1 and the latest psdzdata 62.5. Using f048 on the launcher and selecting F056 as usual for the coding


Wondering anyone help help and offer advice. Thanks in advance

[Sabovoj]

Originally Posted by BMW newbie 2016

I had never heard of coding until I joined this group. I think it's great that you can customize so many aspects of the system in your car.
I am wondering how difficult this is to do and what type of equipment it requires.
Sounds like some of you guys are doing this yourselves. What do you need in terms of software and would a novice be able to code any of these things himself.
I like the idea of folding the mirrors when locking the car and changing the blinking signal from 3 to 5 blinks as someone had mentioned in this thread.
Also does this have any effect on the warranty of the vehicle?
I'm very interested in this type of manipulation of the system.
Thanks

Download BimmerCode app from appstore and go to Bimmercode.com. It will tell you which Wifi adapter to buy so you can code off your phone. So easy!

[mr_lab_rat]

Yes, Bimmercode is easier to use but it has limitations. For simple stuff like iDrive disclaimer, turn signal blinks, and mirror folding it's great.

[Almaretto]

Originally Posted by CS328Ci

I'm trying to figure out how to code the seatbelt lights and sound off after my dealer updated the software on my wife's X1.

After the software update, I don't see the necessary fields to code the seatbelt warning off. It's not on the list of items under ACSM that were there prior to the update. Instead, all I see is "zuendkreis"

I'm running esys 3.27.1 and the latest psdzdata 62.5. Using f048 on the launcher and selecting F056 as usual for the coding


Wondering anyone help help and offer advice. Thanks in advance

Setting are in section 3001.

[CS328Ci]

Originally Posted by Almaretto

Setting are in section 3001.

Originally Posted by Almaretto

Setting are in section 3001.

Tried 3001, not there either. Maybe I'll wait a bit longer and see if there is an updated psdzdata and try it again in a month or so.


Thanks though

[Almaretto]

Originally Posted by CS328Ci

Tried 3001, not there either. Maybe I'll wait a bit longer and see if there is an updated psdzdata and try it again in a month or so.


Thanks though

I found no problem using Launcher Cheat Codes as well as visually looking in that section.

Updated PSdZ will not make a difference unless you cannot read CAFD's. Mapping comes from launcher.

[bavarian star]

Originally Posted by jpwakan

Hi,

Is it possible to have cornering lights at any speed - above 70km/h
And to reduce steering wheel rotation to have them on.

Thanks

I'd also like to have the cornering lights on above 70km/h. Does anyone know how to code it?

[iceman7]

Originally Posted by bavarian star

I'd also like to have the cornering lights on above 70km/h. Does anyone know how to code it?

What do you mean by cornering lights?
Do you mean the fog lights to switch on while turning like in VAG cars?

[bavarian star]

Originally Posted by iceman7

What do you mean by cornering lights?
Do you mean the fog lights to switch on while turning like in VAG cars?

Not fog lights like VAG. The F48 cornering lights are integrated in the headlight unit.

[iceman7]

Originally Posted by bavarian star

Not fog lights like VAG. The F48 cornering lights are integrated in the headlight unit.

Thanks for the clarification!
Is such a function (as in VAG cars) available in the X1 through coding?

[bavarian star]

Originally Posted by iceman7

Thanks for the clarification!
Is such a function (as in VAG cars) available in the X1 through coding?

Maybe, but it requires, that the fog lights are movable. I guess, they are fixed in the F48.

[Almaretto]

Originally Posted by bavarian star

Maybe, but it requires, that the fog lights are movable. I guess, they are fixed in the F48.

Lights can be focused or directed without main housing moving.

[jpwakan]

Hi,

May I have a link to download the latest PSdZdata and launcher.

Thanks

[Almaretto]

Originally Posted by jpwakan

Hi,

May I have a link to download the latest PSdZdata and launcher.

Thanks

Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links

[jpwakan]

Sorry..
But thanks ��