Sponsored by The Tire Rack

[GATORSHOES2]

So trying to find some new wheels for my e92 335i. I love these and think a style like this looks great on the E92.

I have been looking and cant find anything like these that are not 2k plus for a set.
These are BCForged HB29




Any help appreciated.

[Nitrous Garage]

BC wheels are forged and will run a lot of money. If you don't want to spend that much there are some cast wheels that look similar.

Shoot me a PM if you like any of these. If I am in the right direction there are a few more out there that you might like too.

[bmw325i]

Here is another one that is similar.
https://www.forgestar.com/v2/wheelscf10.php

[RDTeam]

Check out the MRR Ground Force 06
(GF06)

http://www.e90post.com/forums/showthread.php?t=868940

[Nitrous Garage]

Originally Posted by RDTeam

Check out the MRR Ground Force 06
(GF06)

http://www.e90post.com/forums/showthread.php?t=868940

Those are awesome looking too

[michael1972]

Look a bit like Rohana rc10's

[lmoretti]

on the ground force I emailed them today to see but the front wheel in 8.5 and 9.5 is not concave like the ones you posted, the rears are. I am waiting to hear if you can fit the 9.5 rear on the front to keep both rear and front extra concave.. Looking for the same type of setup as well

[RDTeam]

Originally Posted by lmoretti

on the ground force I emailed them today to see but the front wheel in 8.5 and 9.5 is not concave like the ones you posted, the rears are. I am waiting to hear if you can fit the 9.5 rear on the front to keep both rear and front extra concave.. Looking for the same type of setup as well

It's not a problem to fit 9.5 on front. It is all depends on offset of wheel and ride height! 9.5 w/225/35 or even 235/35 with offset 25-30 will fit without any rubbing issues.
Here for example square 9.5 all around:
http://www.e90post.com/forums/showth...=862563&page=2

[007_e350]

those are Vossens, totally worth the money

[GATORSHOES2]

Originally Posted by Nitrous Garage

Those are awesome looking too

PMed you!

Thanks guys! Still looking for something close enough that I like. Unfortunately the niche vicenza are only in 20" ._.

[lmoretti]

Originally Posted by RDTeam

It's not a problem to fit 9.5 on front. It is all depends on offset of wheel and ride height! 9.5 w/225/35 or even 235/35 with offset 25-30 will fit without any rubbing issues.
Here for example square 9.5 all around:
http://www.e90post.com/forums/showth...=862563&page=2

Yes I do understand that. What I am trying to say is that MMR makes two different 9.5 rims. One with very concave meant to be in the rear with a 8.5 front and non concave meant to be in the front with a concave 10.5 rear. The reason I said this was his original picture asking for rims that like "these" shows very concave in the front. I am looking for the same setup but wouldn't want to have a non concave rim in the front... hopefully that makes sense.

[RDTeam]

Originally Posted by lmoretti

Yes I do understand that. What I am trying to say is that MMR makes two different 9.5 rims. One with very concave meant to be in the rear with a 8.5 front and non concave meant to be in the front with a concave 10.5 rear. The reason I said this was his original picture asking for rims that like "these" shows very concave in the front. I am looking for the same setup but wouldn't want to have a non concave rim in the front... hopefully that makes sense.

You better ask the member WTOS about that.But i think it should fit depends on that Forgestar Super Deep Concave are more concaved then MRR and several members use it on front even in 10J. Again it is all depends on offset.

Here was a member with MRR's 9.5 and 10.5 , depends on pics he also have a concaved front, maybe it will help
http://www.e90post.com/forums/showthread.php?t=906266