Extra resistors included with Jehnert Flatline set

Hopeful · 08-06-2013, 08:24 AM

Anyone else bought this kit recently? Two extra resistors in the box with an instruction sheet in German. I e-mailed them and, apparently, you need to modify the crossover for the mid/tweeter if the tweeter is too loud. From the pictures in the leaflet it would appear that I should have received four resistors but I'm still waiting for a reply on that.

Technic · 08-06-2013, 09:33 AM

I would bet that this resistor "add-on" is particularly designed for the Stereo (no OEM amp) system and not applicable to others (HiFi, Logic7/HK).

kaigoss69 · 08-06-2013, 10:11 AM

I have to say these instructions, and the methodology, suck. I agree OP, the instruction clearly state that two resitors have to be replaced on ONE crossover. But then it also says they provide two resistors total....

morellomax · 08-07-2013, 02:58 PM

The first sentence translates as:

"In some BMW models the frequency response of the sound system is heavily altered from the factory."

So it does seem as though this instruction sheet only applies to you if you have the base sound system (no factory tweeters).

08-06-2013, 08:24 AM	#1
Hopeful Second Lieutenant 45 Rep 217 Posts Drives: BMW X3 G01 30d 2018 Join Date: Oct 2012 Location: Dorset iTrader: (0)	Extra resistors included with Jehnert Flatline set Anyone else bought this kit recently? Two extra resistors in the box with an instruction sheet in German. I e-mailed them and, apparently, you need to modify the crossover for the mid/tweeter if the tweeter is too loud. From the pictures in the leaflet it would appear that I should have received four resistors but I'm still waiting for a reply on that.
	Appreciate 0 Tweet Quote

08-06-2013, 09:33 AM	#2
Technic Lieutenant General 2288 Rep 13,001 Posts Drives: 2021 i3S, 2024 i4 M50 Join Date: Apr 2005 Location: Florida iTrader: (18)	I would bet that this resistor "add-on" is particularly designed for the Stereo (no OEM amp) system and not applicable to others (HiFi, Logic7/HK).
	Appreciate 0 Quote

08-06-2013, 10:11 AM	#3
kaigoss69 Brigadier General 300 Rep 3,969 Posts Drives: '08 335i Join Date: Jul 2008 Location: JAX iTrader: (6)	I have to say these instructions, and the methodology, suck. I agree OP, the instruction clearly state that two resitors have to be replaced on ONE crossover. But then it also says they provide two resistors total.... __________________ Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
	Appreciate 0 Quote

08-07-2013, 02:58 PM	#4
morellomax Lieutenant 119 Rep 565 Posts Drives: 2022 M440i xDrive convertible Join Date: Sep 2012 Location: UK iTrader: (0)	The first sentence translates as: "In some BMW models the frequency response of the sound system is heavily altered from the factory." So it does seem as though this instruction sheet only applies to you if you have the base sound system (no factory tweeters).
	Appreciate 0 Quote