|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: N54 Gruppe M Project
|
|
07-26-2012, 10:39 PM | #1 |
Colonel
82
Rep 2,325
Posts |
FS: N54 Gruppe M Project
Im selling my Gruppe M project because I simply don't have the time to complete it. Two of the three pieces have been wet sanded to a "matte" finish and only require a once over with 2000+ grit sand paper. The lid to the air box has not yet been touched due to my time constraints. I am aware of the clearcoat cracks on the one piece. This will either need to be sanded and recleared, painted, or covered with vinyl, heat shielding, etc. The filter is in great shape and there is a fresh bit of adhesive foam strips to seal the air box. I can provide more pics if necessary. Check my feedback, Paypal preferred, shipped in the Cont US. The intake is missing the 4th piece, which comes in front of the front crossmember and drops beneath the grills with scoops. This intake is $2400 new from Gruppe M. Link here: http://www.**********s.com/Gruppe-M-...ake-System.htm $450 shipped.
__________________
| Andrew | M Technik | BMW Performance | BBS | Forge | V1 | LUX | Bilstein | Precision-Sport |
|
08-06-2012, 12:35 PM | #3 |
Banned
50
Rep 1,731
Posts |
how much more to source that fourth part?
|
Appreciate
0
|
08-06-2012, 02:05 PM | #4 |
Colonel
82
Rep 2,325
Posts |
If I recall correctly, Gruppe M NA quoted me ~$750 for the piece. You can also look into Technocraft, they offer the same piece for far less at the link below (the M3 and 335 use the same part number primary intake section).
http://www.tecnocraft.com/Tecnocraft...Scoop-P19.aspx
__________________
| Andrew | M Technik | BMW Performance | BBS | Forge | V1 | LUX | Bilstein | Precision-Sport |
|
Appreciate
0
|
08-10-2012, 10:19 AM | #5 |
Average Car Exceeding Expectations (ACEE)
358
Rep 4,806
Posts |
correct me if I'm wrong but you don't REALLY need that piece correct?
__________________
too much to list...just know its wide and bagged |
Appreciate
0
|
08-10-2012, 10:36 AM | #6 |
Colonel
82
Rep 2,325
Posts |
The missing piece from the intake system is not critical to its function, aFe scoops (or equivalent) would to the same thing. If you have further questions, let me know.
__________________
| Andrew | M Technik | BMW Performance | BBS | Forge | V1 | LUX | Bilstein | Precision-Sport |
|
Appreciate
0
|
Bookmarks |
|
|