[BMW335icoupe]

I was at my dealer over the weekend and something caught my attention. It was the BMW paint touch up kits. On the front of my hood I have about 10 little rock chips. How would I go about applying the paint. Should you wax first or not have wax.

How are the results.

[BMW335icoupe]

Or should I use dr colorchip. Looks like a great product.

[mvillezcas]

If the chips are small, use the BMW touch up paint. Make sure you have the clearcoat as well.
I used this method on my Blk Saph Met e92 and it came out as good as possible DIY.
1. Wash/Dry Car
2. With toothpick, fill in chips with paint.
3. Let dry as recommended
4. With toothpick, apply clearcoat
5. Then do your polishing, waxing, etc...

[BMW335icoupe]

Originally Posted by mvillezcas

If the chips are small, use the BMW touch up paint. Make sure you have the clearcoat as well.
I used this method on my Blk Saph Met e92 and it came out as good as possible DIY.
1. Wash/Dry Car
2. With toothpick, fill in chips with paint.
3. Let dry as recommended
4. With toothpick, apply clearcoat
5. Then do your polishing, waxing, etc...

Ok thanks. I appreciate your help!!

[e90Luis]

Originally Posted by mvillezcas

If the chips are small, use the BMW touch up paint. Make sure you have the clearcoat as well.
I used this method on my Blk Saph Met e92 and it came out as good as possible DIY.
1. Wash/Dry Car
2. With toothpick, fill in chips with paint.
3. Let dry as recommended
4. With toothpick, apply clearcoat
5. Then do your polishing, waxing, etc...

So I should strip all sealant and wax on the car before applying any touch up paint?

[BMW335icoupe]

Originally Posted by e90Luis

So I should strip all sealant and wax on the car before applying any touch up paint?

Thanks for asking. I have the same question. If so how do you strip the wax. With dawn.