VPA-B222R -wiring diagrams for idrive ?

adamczyk_k · 10-13-2009, 06:19 PM

Hello,

I have problems with instaling a Alpine VPA-B222R into my car. (e91 - with idrive)

Does anyone knew the wiring diagram of the CCC module ? The colours and description of wires? (I have basic audio) There are lot of wires from alpine that I need to connect to stock system.

Regards,

Chris

adamczyk_k · 10-13-2009, 06:33 PM

From the Alpine there are 2 wires:

From the alpine there are two harnes: (so I have to connect them somewere...?)

First:
(the description on the wires is in / / :

yellow /batt/ -
yellow-green /parking brake/
pink-black /in int/
red /acc/
blue /p.ant/ -
black //
blue-white /remo/
white + white/black /f-lch/
grey + grey-black /f-rch/
green + green-black /r-lch/
violet + violet-black /r-rch

2. second

white-brown /rem out aux1/
white-brown /rem out aux2/
white-green /guide cont/
orange /illm/
grey-red /sp input front right (-)/
white-red /sp input front left (-)/
white /sp input front left (+)/
grey /sp input front right (+)/

Does Anyone know where to connect them with stock idrive HU ?

VP Electricity · 10-13-2009, 08:14 PM

You should buy a Quadlink adapter. There are several sources in the EU (Dietz is one I know). http://www.dietzshop.biz/

There are problems with US-spec cars when the HU is removed. You may have problems updating the SW in future if you do not install BMW HU somewhere (in storage bin?)

adamczyk_k · 10-14-2009, 03:36 PM

Quote:

Originally Posted by VP Electricity

You should buy a Quadlink adapter. There are several sources in the EU (Dietz is one I know). http://www.dietzshop.biz/

There are problems with US-spec cars when the HU is removed. You may have problems updating the SW in future if you do not install BMW HU somewhere (in storage bin?)

I dont want to threw away stock Hu - . I want to get the hi input signal from HU to the Alpine VPA. Than to VPA I'll connect the audio procesor. In the future I want to add new audio source like dvd changer for better sound quality.

The only one thing I dont knew is the names of the wires going to the HU - and where to connect those two Alpine harness. (the wires and names of them I have written in the last post)

10-13-2009, 06:19 PM	#1
adamczyk_k New Member 0 Rep 6 Posts Drives: 330d E91 Join Date: Oct 2009 Location: Warsaw iTrader: (0)	VPA-B222R -wiring diagrams for idrive ? Hello, I have problems with instaling a Alpine VPA-B222R into my car. (e91 - with idrive) Does anyone knew the wiring diagram of the CCC module ? The colours and description of wires? (I have basic audio) There are lot of wires from alpine that I need to connect to stock system. Regards, Chris
	Appreciate 0 Tweet Quote

10-13-2009, 06:33 PM	#2
adamczyk_k New Member 0 Rep 6 Posts Drives: 330d E91 Join Date: Oct 2009 Location: Warsaw iTrader: (0)	From the Alpine there are 2 wires: From the alpine there are two harnes: (so I have to connect them somewere...?) First: (the description on the wires is in / / : yellow /batt/ - yellow-green /parking brake/ pink-black /in int/ red /acc/ blue /p.ant/ - black // blue-white /remo/ white + white/black /f-lch/ grey + grey-black /f-rch/ green + green-black /r-lch/ violet + violet-black /r-rch 2. second white-brown /rem out aux1/ white-brown /rem out aux2/ white-green /guide cont/ orange /illm/ grey-red /sp input front right (-)/ white-red /sp input front left (-)/ white /sp input front left (+)/ grey /sp input front right (+)/ Does Anyone know where to connect them with stock idrive HU ?
	Appreciate 0 Quote

10-13-2009, 08:14 PM	#3
VP Electricity Brigadier General 289 Rep 3,201 Posts Drives: F34 xDrive Join Date: Jan 2008 Location: portland oregon iTrader: (3)	You should buy a Quadlink adapter. There are several sources in the EU (Dietz is one I know). http://www.dietzshop.biz/ There are problems with US-spec cars when the HU is removed. You may have problems updating the SW in future if you do not install BMW HU somewhere (in storage bin?)
	Appreciate 0 Quote