[mike_o]

Howdy folks,

I've searched and read 10-15 posts on seat swap and seat issues, but I've not really found the answers to my questions:

I'd like to fit a set of electric, low milage, 2012 M3 seats into my 2011 335is (coupe).

Should and could I move the existing 335is seat modules to the new seats? Or could I use the M3 seat's modules as is and code my way out of errors?

And anything else (mechanical issues) that I should be aware of?

thanks,

Mike

[Leucosticte]

I put M3 seats in my car with no modifications needed.

I used the seat modules that came with the M3 seats.

[pedro2u]

Should be plug and play. Just swap the entire seat

[ptpending]

Originally Posted by mike_o

Howdy folks,

I've searched and read 10-15 posts on seat swap and seat issues, but I've not really found the answers to my questions:

I'd like to fit a set of electric, low milage, 2012 M3 seats into my 2011 335is (coupe).

Should and could I move the existing 335is seat modules to the new seats? Or could I use the M3 seat's modules as is and code my way out of errors?

And anything else (mechanical issues) that I should be aware of?

thanks,

Mike

if you current 335is seats are electric, then this will be plug and play.