[fredde85]

Hi, Any coding that will remember the last setting on the bc computer? Every time i start the car now it will show "km to empty tank"

[atzebmw]

I think there is no coding.
But i also wonder, because my car shows the current consumption at the start.
I also have 6WB Kombi.

[fredde85]

Originally Posted by atzebmw

I think there is no coding.
But i also wonder, because my car shows the current consumption at the start.
I also have 6WB Kombi.

Ok. Before my car shows blank screen when startup. But after i code to add "Compass" in bc now my car shows "Km to empy tank" on startup.

[atzebmw]

Originally Posted by fredde85

Ok. Before my car shows blank screen when startup. But after i code to add "Compass" in bc now my car shows "Km to empy tank" on startup.

Compass i have coded too.
Do you use E-Sys?
If yes, you can compare the coding with mine.

[fredde85]

Originally Posted by atzebmw

Compass i have coded too.
Do you use E-Sys?
If yes, you can compare the coding with mine.

I used bimmercode
Kombi > 3003 FZG_Ausstattung > kompass_graph_enable: Aktiv

[Ibo24]

Try undoing compass coding, see if it works back as supposed.

[fredde85]

Anyone?