02-01-2019, 12:34 PM | #1 |
Major
490
Rep 1,309
Posts |
Fried my amp. Need a photo of a good board
I have a L7/HK amplifier part 9261703.
I plugged in the MOST cable for the CD Changer instead of the MOST cable for the Amp, which has a +12v and GND on pins 1+2 of the pinned portion of the most connector. So, GND went straight to a 12v feed inside the amp. A diode caught on fire in the process. I *think* it might be the only casualty, so I'd like to replace that diode. But... it isn't like Harman/Becker releases schematics of these boards. Does anyone have one of these on a bench/shelf and wouldn't mind taking a picture of the board with the cover off? Thanks!!! |
Post Reply |
Bookmarks |
|
|