[RagingGoat]

Sorry new to f30 so wanted to see if this is the correct kit to buy for a '14 328d. Thank you!

https://www.fcpeuro.com/products/bmw...-24118612901kt

[Polo08816]

That's the kit I bought for my 2014 335i RWD M Sport.

It says it should work for the 328d.

[RagingGoat]

Originally Posted by Polo08816

That's the kit I bought for my 2014 335i RWD M Sport.

It says it should work for the 328d.

Thank you, do you recommend flushing as well? Mine has 75k miles on it already and have not had a atf change.

[F32Fleet]

Originally Posted by RagingGoat

Sorry new to f30 so wanted to see if this is the correct kit to buy for a '14 328d. Thank you!

https://www.fcpeuro.com/products/bmw...-24118612901kt

Seems comparable.

http://www.thectsc.com/products/oil-...--227-109.html

BTW.. there's no way to flush and little need since the tq converter doesn't hold much fluid anyways.

[RagingGoat]

Thank you didn't know you can't flush. I will order this kit, thank you for the help!

[floydarogers]

Originally Posted by F32Fleet

...
BTW.. there's no way to flush and little need since the tq converter doesn't hold much fluid anyways.

I'm pretty sure that's not correct. It has about 2 quarts/liters, and it can be flushed (requires some hoses and running the engine.)

[RagingGoat]

Originally Posted by floydarogers

I'm pretty sure that's not correct. It has about 2 quarts/liters, and it can be flushed (requires some hoses and running the engine.)

It is ok to just change the fluid without flushing?

[F32Fleet]

Originally Posted by RagingGoat

It is ok to just change the fluid without flushing?

That's SOP per ZF. You should reset the transmission as well but you need a computer to do it.

[Polo08816]

Originally Posted by F32Fleet

Seems comparable.

http://www.thectsc.com/products/oil-...--227-109.html

BTW.. there's no way to flush and little need since the tq converter doesn't hold much fluid anyways.

Originally Posted by F32Fleet

That's SOP per ZF. You should reset the transmission as well but you need a computer to do it.

+1.

Drain and fill + a few more steps.

[floydarogers]

Originally Posted by RagingGoat

It is ok to just change the fluid without flushing?

Yes. Probably 80% seem to be doing drain-and-replace (at least among the people posting on the forums.) Certainly better than not doing anything at all.

[RagingGoat]

Ok thank you very much for everyone help!

[drivef30]

So if im understanding correctly, Ill be completely fine just doing Drain and Fill without doing anything with ISTA. As long as i follow ZF instruction with proper fill temperature etc?