FS: 335is 3.08 Differential 2012

Stephenishere · 02-29-2016, 04:35 PM

BIMMERPOST / Classifieds

Asking Price:

USD 425.00

Item Interest

I have a stock 335is differential with 3.08 gears for sale. I took it off my car before modding so its got about 50k miles with a stock 335is tune. I've upgraded my rear end to a M3 so I no longer need the stock differential. Fluid should be in good shape as it was changed not too long before taking it off.

Here's a couple of pictures of it.

Looking to get $425 or BO. Shipping not included. (I get cheap shipping rates through work's warehouse.)

Stephenishere · 03-01-2016, 01:27 PM

bumpity bump

dreyo27 · 03-01-2016, 09:58 PM

How difficult was it to do the M3 rear end? I found out that a DCT M3 has i think a 3.15 ratio so its almost a perfect match.
Did you do the whole rear end, hubs brakes etc or just the axles and drive shaft?
how much did it cost you to get the driveshaft shortened?
thank you in advance

Stephenishere · 03-09-2016, 06:58 PM

Quote:

Originally Posted by dreyo27

How difficult was it to do the M3 rear end? I found out that a DCT M3 has i think a 3.15 ratio so its almost a perfect match.
Did you do the whole rear end, hubs brakes etc or just the axles and drive shaft?
how much did it cost you to get the driveshaft shortened?
thank you in advance

It was kind of a pain tbh that cost a lot more than I wanted. I don't know if i'd personally still do it now that I've seen the cost and gains. The M3 diff required new half shafts and a M3 drive shaft. You'll need to cut the part of the drive shaft that goes to the trans as it has a different bolt pattern for the 335 vs M3. I forced mine to fit best as I could but I don't recommend it. Shops charge like $300 to get it cut welded and balanced. Now that its in I've got pretty bad wheel hop, but it definitely grips better overall with the new diff installed.

Stephenishere · 03-09-2016, 06:58 PM

Bump. Price Reduced.

alex_beridze · 03-11-2016, 02:27 PM

Hello diff is bolted or welded? I need to swap it for lsd

Stephenishere · 03-14-2016, 11:48 PM

Quote:

Originally Posted by alex_beridze

Hello diff is bolted or welded? I need to swap it for lsd

Its the stock diff. I'm not sure what they are stock. Its never been opened before. I'll go look when I get home tomorrow and see if I can tell.

Stephenishere · 03-17-2016, 12:28 AM

bump

Stephenishere · 03-19-2016, 11:03 AM

Bump

Lofuel · 03-19-2016, 05:30 PM

Quote:

Originally Posted by Stephenishere

Its the stock diff. I'm not sure what they are stock. Its never been opened before. I'll go look when I get home tomorrow and see if I can tell.

It's welded for sure

Stephenishere · 03-22-2016, 01:20 PM

Bump

Stephenishere · 03-23-2016, 04:13 PM

bump

BIMMER_Tech 631 · 04-23-2016, 10:59 AM

ill give you 400 shipped to 11731

Stephenishere · 04-26-2016, 07:34 PM

Bump. Price reduced to 425+ship. (Freight or UPS ground)

bjf66 · 05-08-2016, 05:13 PM

Hi, I was just wondering how come you decided on a M3 rear (was it a performance reason, or a convenience reason because it was available at a good price?), because it seems like another good option is to just install a good aftermarket LSD into the 335is differential unit.

Anyway, good luck with the sale. Hope you can share with me your thoughts.

02-29-2016, 04:35 PM	#1
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	FS: 335is 3.08 Differential 2012 BIMMERPOST / Classifieds Asking Price: USD 425.00 Item Interest I have a stock 335is differential with 3.08 gears for sale. I took it off my car before modding so its got about 50k miles with a stock 335is tune. I've upgraded my rear end to a M3 so I no longer need the stock differential. Fluid should be in good shape as it was changed not too long before taking it off. Here's a couple of pictures of it. Looking to get $425 or BO. Shipping not included. (I get cheap shipping rates through work's warehouse.) Last edited by Stephenishere; 04-26-2016 at 07:35 PM..
	Appreciate 1 Tweet Quote

03-01-2016, 01:27 PM	#2
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	bumpity bump
	Appreciate 0 Quote

03-01-2016, 09:58 PM	#3
dreyo27 First Lieutenant 92 Rep 322 Posts Drives: 2007 335i e92 Join Date: Aug 2015 Location: Sacramento CA iTrader: (3)	How difficult was it to do the M3 rear end? I found out that a DCT M3 has i think a 3.15 ratio so its almost a perfect match. Did you do the whole rear end, hubs brakes etc or just the axles and drive shaft? how much did it cost you to get the driveshaft shortened? thank you in advance
	Appreciate 0 Quote

03-09-2016, 06:58 PM	#5
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	Bump. Price Reduced.
	Appreciate 0 Quote

03-11-2016, 02:27 PM	#6
alex_beridze Private 6 Rep 97 Posts Drives: BMW 335 2008 Year Join Date: Sep 2014 Location: Georgia iTrader: (0)	Hello diff is bolted or welded? I need to swap it for lsd
	Appreciate 0 Quote

03-17-2016, 12:28 AM	#8
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	bump
	Appreciate 0 Quote

03-19-2016, 11:03 AM	#9
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	Bump
	Appreciate 0 Quote

03-22-2016, 01:20 PM	#11
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	Bump
	Appreciate 0 Quote

03-23-2016, 04:13 PM	#12
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	bump
	Appreciate 0 Quote

04-23-2016, 10:59 AM	#13
BIMMER_Tech 631 Private First Class 31 Rep 155 Posts Drives: 2007 E92 335i TIAG Join Date: Nov 2015 Location: Suffolk iTrader: (0) Garage List 2007 BMW 335i [0.00]	ill give you 400 shipped to 11731
	Appreciate 0 Quote

04-26-2016, 07:34 PM	#14
Stephenishere New Member 4 Rep 22 Posts Drives: 09 Cobalt SS/TC & 80 C3 Vette Join Date: May 2015 Location: Dallas TX iTrader: (0)	Bump. Price reduced to 425+ship. (Freight or UPS ground)
	Appreciate 0 Quote

05-08-2016, 05:13 PM	#15
bjf66 Banned 51 Rep 457 Posts Drives: E92 335is DCT Join Date: Mar 2011 Location: Wyoming iTrader: (0)	Hi, I was just wondering how come you decided on a M3 rear (was it a performance reason, or a convenience reason because it was available at a good price?), because it seems like another good option is to just install a good aftermarket LSD into the 335is differential unit. Anyway, good luck with the sale. Hope you can share with me your thoughts.
	Appreciate 0 Quote