04-17-2019, 08:33 PM | #155 | |
Private
49
Rep 69
Posts |
Quote:
Thank you for sharing the information. I will refer to the photo with the writing of #136. I think that it is the same from the image of the top menu. I would like to challenge the setting of unlock. Thank you. P. S. The BIMMERCODE app has been translated into Japanese from today, and it is difficult to understand even Japanese native. (How do you write English-speaking jokes?) |
|
Appreciate
1
MJE60678.00 |
04-18-2019, 05:04 AM | #156 | |
Captain
678
Rep 910
Posts |
Quote:
Here is my best guess at settings you need to change to enable office/email functions. All are in expert mode and please note you may not have all of them (some are options dependent on HU). Please note you will need to disconnect and reconnect phone and also make sure your phone “office connection” is ON and “phone notifications” is ON and notifications for text is ON. [in your phone settings menus] Coding - please note I have not verified these and you will not have all of them. All are in expert mode. What is possible will depend on your car specification. I am told F48 without enhanced Bluetooth do not have a COMBOX and without COMBOX “office” activation is not possible. I cannot therefore advise on what functions it will actually be possible to activate! Perhaps limited functionality. All these should be in HU . I would first search in expert mode for email, sms, office, contacts and make a list of everything you find and location. It would not hurt to also check in BDC Ecu and any other Ecu which might be relevant (you should not have separate BT or Comms boxes but make sure. Finally here is my list ———> You need to change setting from nicht to aktiv. EMAIL_EIN_AUS SMS_EIN_AUS TASK_EIN_AUS TEXT_NOTES_EIN_AUS CONTACTS_EIN_AUS CALENDAR_EIN_AUS REMINDERS_TRIGGERS_EIN_AUS PIM_BON_EMAIL PIM_NEW_ELEMENT_EMAIL PIM_NEW_ELEMENT_SMS PIM_HTML_EMAIL_BROWSER PIM_NEW_ELEMENT_VOICE_EMAIL MACRO_PIM PIM_BILDER_EIN_AUS You may need to experiment. I would start enabling all the EIN/AUS first. καλή τύχη For anyone else reading this post please note that easiest and best way for owners with Entrynav2 HU and connected drive services, is go into connected drive and enable functions! Last edited by MJE60; 04-22-2019 at 04:02 PM.. |
|
04-18-2019, 08:43 PM | #157 | |
Private
30
Rep 83
Posts |
My 2016 has High beam assist
Quote:
|
|
Appreciate
1
MJE60678.00 |
04-22-2019, 02:18 PM | #158 | |
First Lieutenant
171
Rep 313
Posts |
Quote:
|
|
Appreciate
0
|
04-22-2019, 03:25 PM | #159 | |
Captain
678
Rep 910
Posts |
Quote:
So FEM (front electronic module functions) are in BDC. You may be confusing demo mode which shows Ecu from a number of different BMW models. In demo mode it shows FEM, REM etc but if you actually go into your F48 system and read the Ecu, you will not see them. Functions listed as being in FEM for other BMW models will, if available, be found in BDC. Please also note Takabo has Japanese F48 which have different NBTevo HU from EU &US cars which have ENTRYNAV/ENTRYNAV2 HU, so some functions/descriptions will be different anyway. Last edited by MJE60; 04-22-2019 at 04:07 PM.. |
|
Appreciate
1
iceman7117.00 |
04-22-2019, 04:27 PM | #160 | |
First Lieutenant
171
Rep 313
Posts |
Quote:
I definitely had FEM previously as shown in my earlier post: https://f48.bimmerpost.com/forums/sh...&postcount=136 I will have to check if the locking setting is under BDC. |
|
Appreciate
0
|
04-22-2019, 05:09 PM | #161 | |
Captain
678
Rep 910
Posts |
Quote:
Last edited by MJE60; 04-23-2019 at 07:55 AM.. |
|
Appreciate
1
iceman7117.00 |
04-22-2019, 08:45 PM | #162 |
Private
49
Rep 69
Posts |
Hello.
I am on a business trip. We plan to unlock shared on the weekend when we go home. The BIMMERCODE application has been translated into Japanese and has become difficult to understand. Attach the capture screen (F39 X2) before Japanese localization. Please refer to everyone. Thank you very much. |
Appreciate
1
MJE60678.00 |
04-23-2019, 03:42 AM | #163 | |
Second Lieutenant
117
Rep 212
Posts |
Quote:
|
|
Appreciate
1
MJE60678.00 |
04-23-2019, 06:39 AM | #164 |
Registered
0
Rep 1
Posts |
Hi guys, nice to meet you all, I'm new the BMW communit. I recently bought an X1 F48 (made April 2016) and wanted to code some changes in the car's behavior (which was an interesting exercise for me as I've done a lot of coding for the past 10 years on VAG cars and was looking forward to see the possibilities that BMW offers in this regard). I won't bore you any longer with the details so I have a couple of questions that I was not able to find an answer to and I was hoping you guys might be able to help me out:
Note: I've gone for the easy coding method using BimerCode.
|
Appreciate
0
|
04-23-2019, 07:18 AM | #165 | |
Captain
678
Rep 910
Posts |
Quote:
Welcome to the forum, quick answers to your questions; 1. Your car most likely has an Entrynav HU, in which case you will not be able to code software update without an fsc code which are not available (outside of BMW) for ENTRYNAV / ENTRYNAV2 the changeover date was approx 07/017 and coincided with updated hardware as well as software. Unfortunately Bimmercode incorrectly labels the HU as HU_NBT when it is not. Option 6UP is just “business navigation” with larger 8.8” screen it is not the same as s609 professional navigation (some F48 in Russia, Japan, Taiwan and China have NBTevo HU but most F48 do not). 2. There is a detailed post covering the settings needed for easy entry, may I suggest you start by reading through this thread and finding the posts. Try post number 110 in this thread as an example. I would suggest you go into expert mode and use search facility in order to search for location. The exact location may change but usually you will find where they are easily, so search on terms like “einausstiegshilfe” (entryexithelp in German). Try searching in seat module Ecu first. Once you find the location, all of the necessary parameters should be there. 3. Comfort access mirror fold default setting has a “long press” requirement on the key fob but can be changed (and may vary by market), which yours may have been. You can change settings, most are in Bimmercode easy mode, either in HU or BDC Ecu. Note also some settings can be accessed via the iDrive menu dependent on vehicle HU. I am sure others can be of better assistance on this. Last edited by MJE60; 04-23-2019 at 08:05 AM.. |
|
Appreciate
1
Takabo49.00 |
04-23-2019, 08:01 AM | #166 | |
Captain
678
Rep 910
Posts |
Quote:
The confusion for many F48 owners is that when they look at their screen Bimmercode shows their head unit as HU-NBT when it is actually HU_ENTRYNAV . This incorrect label makes many people think they can upgrade software or make changes such as code Apple CarPlay when it is actually not possible. For people asking why is it not possible? - the answer is that ENTRYNAV HU have ARM chips rather than Intel and the security is stronger, the result is that no software protection (fsc) codes exist in open market for entrynav in order to hack the protection. Last edited by MJE60; 04-23-2019 at 08:10 AM.. |
|
Appreciate
1
Takabo49.00 |
04-23-2019, 08:03 AM | #167 | |
Second Lieutenant
117
Rep 212
Posts |
Quote:
|
|
Appreciate
1
MJE60678.00 |
04-24-2019, 08:35 AM | #168 |
First Lieutenant
171
Rep 313
Posts |
I can confirm that BDC (Body Domain Controller) now has the "Unlock doors automatically" setting (did not work for me anyway) and various other settings that used to be under FEM.
|
04-25-2019, 02:12 PM | #170 | |
Private First Class
52
Rep 105
Posts |
Quote:
But from my understanding putting it in sports mode then turning off DSC will provide you with the same thing, Same with Launch Control. According to the manual to enable launch control you put in sports mode, turn off DSC and push your foot on the brake and gas until a flag appears on your dash. |
|
Appreciate
0
|
04-25-2019, 03:14 PM | #171 | |
New Member
10
Rep 22
Posts |
Quote:
As you can see from the video: View post on imgur.com Last edited by Viltronian; 04-25-2019 at 03:19 PM.. |
|
Appreciate
0
|
04-25-2019, 03:29 PM | #172 | |
Captain
678
Rep 910
Posts |
Quote:
You may not have applied enough gas, your foot needs to hit the floor (full kick-down) so you are at Max revs. Flag will appear and revs will drop to optimum launch level, you need to release brake within 3 seconds. Also engine needs to be fully warmed up. I attach section from manual Last edited by MJE60; 04-25-2019 at 03:38 PM.. |
|
Appreciate
2
PurePulse6451.50 Viltronian9.50 |
04-26-2019, 12:56 PM | #173 | |
New Member
10
Rep 22
Posts |
Quote:
View post on imgur.com |
|
Appreciate
0
|
04-26-2019, 04:03 PM | #174 | |
Captain
678
Rep 910
Posts |
Quote:
Last edited by MJE60; 04-27-2019 at 02:32 AM.. |
|
Appreciate
0
|
04-27-2019, 02:28 AM | #176 | |
Captain
678
Rep 910
Posts |
Quote:
In contrast I am not sure if any U.S F48 have DCT/DSG boxes, perhaps someone can advise? Anyhow, question is whether it is just the Aisin boxes that have launch control or do the DSG have it as well, or whether it has to do with engine size? Last edited by MJE60; 04-28-2019 at 01:43 AM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|