Anyone have experience with Turner wheel spacers?

Drizz · 10-27-2014, 01:31 PM

People on these forums seems to default to M&S. Wondering if anyone has information on Turner and why they're either solid/not in terms of performance.

Sektion9 · 10-27-2014, 07:07 PM

The units we've seen were very similar in quality to MS ones and we havn't seen or had any reason to not recommend them.

Drizz · 10-27-2014, 08:47 PM

Quote:

Originally Posted by Sektion9

The units we've seen were very similar in quality to MS ones and we havn't seen or had any reason to not recommend them.

Cool, thanks for the feedback.

kitw · 10-28-2014, 03:32 PM

I have found the Turner ones to be very good. I'm very happy with them.

JoeFromPA · 10-28-2014, 04:07 PM

Turner is unlikely to put out a bad product, especially a bad mechanical product. Their reputation is racing and track longevity. Wheel spacers would be a very bad area to fall short on that.

Drizz · 10-28-2014, 10:35 PM

Ok cool. Good feedback. Thanks again everyone.

CanAutM3 · 10-29-2014, 05:04 AM

I used 12.5mm front and 5mm rear spacers with appropriate bolts all purchased from Turner on my E92 without any issues. The spacers had a very good fit and were easy to install and remove. The spacers also have small scallops on the back side to ease removal. I also used them on my wither wheels and never had an issue removing them in the spring. I was very happy with them.

TheEnrique · 11-01-2014, 07:46 PM

im running 15mm on all four corners from Turner right now and no issues.

Dave2011M3 · 11-02-2014, 12:00 PM

Early MS spacers were junk in my opinion. The newer ones on the level of Turners. However, I still feel Turners are the best out there.

Dave

10-27-2014, 01:31 PM	#1
Drizz Lieutenant 182 Rep 595 Posts Drives: '23 BMW X7; '20 911 Carrera S Join Date: Dec 2011 Location: Orange County, CA iTrader: (0)	Anyone have experience with Turner wheel spacers? People on these forums seems to default to M&S. Wondering if anyone has information on Turner and why they're either solid/not in terms of performance.
	Appreciate 0 Tweet Quote

10-27-2014, 07:07 PM	#2
Sektion9 8 Rep 255 Posts Drives: F82 M4 Join Date: Jun 2014 Location: USA iTrader: (0)	The units we've seen were very similar in quality to MS ones and we havn't seen or had any reason to not recommend them.
	Appreciate 0 Quote

10-28-2014, 03:32 PM	#4
kitw Colonel 471 Rep 2,991 Posts Drives: F91 M8, 991.2 GT3 Join Date: Jun 2007 Location: Bay Area, CA iTrader: (20)	I have found the Turner ones to be very good. I'm very happy with them. __________________ DSC_3369 by Kit W, on Flickr
	Appreciate 0 Quote

10-28-2014, 04:07 PM	#5
JoeFromPA Colonel 1796 Rep 2,997 Posts Drives: '15 AW M3 6MT Stripper Join Date: Aug 2013 Location: SE PA iTrader: (0)	Turner is unlikely to put out a bad product, especially a bad mechanical product. Their reputation is racing and track longevity. Wheel spacers would be a very bad area to fall short on that. __________________ AW/Carbonstructure 6MT 2015 M3 picked up 8/22/2014. Stripper except for adaptive suspension. Weighed at 3,450 pounds with 1/4 fuel. 70,000 miles as of February 2020.
	Appreciate 0 Quote

10-28-2014, 10:35 PM	#6
Drizz Lieutenant 182 Rep 595 Posts Drives: '23 BMW X7; '20 911 Carrera S Join Date: Dec 2011 Location: Orange County, CA iTrader: (0)	Ok cool. Good feedback. Thanks again everyone.
	Appreciate 0 Quote

10-29-2014, 05:04 AM	#7
CanAutM3 General 21117 Rep 20,741 Posts Drives: 2021 911 turbo Join Date: Jan 2012 Location: Montreal iTrader: (1) Garage List 2022 Audi RS6 [10.00] 2021 Porsche 911 turbo [10.00]	I used 12.5mm front and 5mm rear spacers with appropriate bolts all purchased from Turner on my E92 without any issues. The spacers had a very good fit and were easy to install and remove. The spacers also have small scallops on the back side to ease removal. I also used them on my wither wheels and never had an issue removing them in the spring. I was very happy with them.
	Appreciate 0 Quote

11-01-2014, 07:46 PM	#8
TheEnrique Colonel 526 Rep 2,333 Posts Drives: F90 M5 Join Date: May 2006 Location: Bergen County, NJ iTrader: (37) Garage List 2020 M5 [0.00] 2012 M3 Coupe [0.00] 2017 M4 Convertible [0.00] 2013 X5M [0.00] 2015 F82 M4 [0.00]	im running 15mm on all four corners from Turner right now and no issues.
	Appreciate 0 Quote

11-02-2014, 12:00 PM	#9
Dave2011M3 Private First Class 8 Rep 129 Posts Drives: 2013 E92 M3 MR/BLK ZCP Join Date: Dec 2011 Location: Playa Del Rey, CA iTrader: (0)	Early MS spacers were junk in my opinion. The newer ones on the level of Turners. However, I still feel Turners are the best out there. Dave __________________ 2013 BMW M3 E92 Melbourne Red/Blk ZCP 6MT 2011 BMW M3 E92 MR/Blk ZCP 2007 Porsche 997.1S 2004 E46 M3 Imola Red/Blk
	Appreciate 0 Quote