05-04-2021, 04:32 PM | #2 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
Love mine!
Gave up on all the vent mounted ones. This thing is rock solid! |
Appreciate
2
xcelir8bmw400.50 Joceppi8516.00 |
05-06-2021, 10:18 AM | #3 |
Major
295
Rep 1,076
Posts |
Hmm I wonder if I can 3d print a mount to work.. I'll see if I have enough spare time. I wouldn't mind the clip, and then use my existing magnet/holder. I currently use a magnet mount on my vents that have been working for years. I just recently got an S21 ultra which is bigger and heavier.
So with the proclip it looks like it has a lot of options.. are you guys using the mount, and with their own case? |
Appreciate
0
|
05-07-2021, 03:03 AM | #5 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
I'm using their mount and an Otterbox case. The mount we have you size it first then attach it to the clip. I looked at the magnetic ones and the wireless charging ones but I just went with the basic clip since I have a usb-c fast charger for my iphone.
I didn't even need to use the adhesive strips on the mount, it just clipped in and is rock solid. |
Appreciate
0
|
05-11-2021, 12:23 PM | #7 |
Major
401
Rep 1,104
Posts |
Dude, after using this for a few days, it is sooooo much better than a vent mount I had. Nice and solid. I used this product on many-many prior cars and I don't know why I didn't look this up recently. Old age maybe. That and stress.
|
Appreciate
0
|
05-14-2021, 03:49 PM | #8 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
Well, I'm ordering the magsafe charger holder since I just got a magsafe charger for my iphone.
if anyone wants the regular holder, i'll sell it cheap. you'll still need a mount. lol Last edited by chowser51; 05-14-2021 at 04:07 PM.. |
Appreciate
1
xcelir8bmw400.50 |
06-01-2021, 03:22 PM | #10 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
I think my phone case is made by Spigen.
I mounted the magsafe charger upside down (the cord is supposed to go through the smaller slot) but it still works fine. |
Appreciate
1
xcelir8bmw400.50 |
06-05-2021, 09:47 AM | #11 |
Major
401
Rep 1,104
Posts |
Well today I went to try out the Mag Safe mount for my new iPhone 12 Pro Max, and well, I'm running a Pitaka case with magnets inside, and it 'kinda' holds, but not as much as I would like for weight bearing purposes. But that isn't just the only problem. The little arm extender attachment that goes under the bottom of the phone to help secure it in place is 1/4" too short and only appears to support OEM Apple cases. If it was the right length, then I'd probably be OK with the combination of the two.
So for me, it's a bust! Luckily, and surprisingly, the mount I had for my iPhone 11 Pro, I was able to loosen the two screws, widen it, and slide in the 12 Pro Max without issues. So I'm back to my original setup which is super strong and I just plug in the USB cable than slapping the phone onto the mount. $65 bux wasted. |
Appreciate
0
|
06-05-2021, 09:50 PM | #12 |
Colonel
1993
Rep 2,799
Posts
Drives: F33 430 and F39 M35i
Join Date: Feb 2009
Location: Cleveland, OH
|
That sucks! My case is made by Spigen.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|