Entrynav to Nbt Evo retrofit help

pepe1234 · 09-12-2023, 04:02 AM

Hi my wife's car is 2016 f48 with entrynav, 8,8 screen and HUD, I want to upgrade HU to nbt evo for CarPlay
Im planning to buy used HU (attached pictures) I know that I have to buy wifi antenna cable, do I need anything else? I think that there is also DAB connector on the back is it possible to use it somehow in my F48?

Im looking for someone who can code it for me with CarPlay upgrading unit to ID6 (I don't know which ID is already installed)

I can mount it by myself looking for help with coding to my VIN

ssjr0498 · 10-04-2023, 06:17 AM

Did you install it? What were the observations? I'm planning to do the same.

kubax86 · 10-04-2023, 01:18 PM

You require:

WiFi antenna, CID Voltage Converter (to 8-8.2V), turning 180 degrees USB Cable and in some cases wiring Ethernet is required (from Quadlock to OABR)

That's hardware, from software - you require coding, proper software to support APIX1 screen which you'll be using (unless you swap to touchscreen which is APIX2)

That's all

P.S. can help with coding if needed

pepe1234 · 10-06-2023, 04:20 AM

I didn't install it yet, I sent my HU to service because I bought it with HDD issue I wasn't able to connect HDD to change VIN

pepe1234 · 10-12-2023, 08:44 AM

kubax86 Can I ask you for relevant Psdzdata to downgrade NbtEvo to 18-03? Mine now is 19-03 and screen not working properly

09-12-2023, 04:02 AM	#1
pepe1234 New Member 2 Rep 18 Posts Drives: X5 G05, X1 F48 Join Date: Dec 2021 Location: PL iTrader: (0)	Entrynav to Nbt Evo retrofit help Hi my wife's car is 2016 f48 with entrynav, 8,8 screen and HUD, I want to upgrade HU to nbt evo for CarPlay Im planning to buy used HU (attached pictures) I know that I have to buy wifi antenna cable, do I need anything else? I think that there is also DAB connector on the back is it possible to use it somehow in my F48? Im looking for someone who can code it for me with CarPlay upgrading unit to ID6 (I don't know which ID is already installed) I can mount it by myself looking for help with coding to my VIN Attached Images
	Appreciate 0 Tweet Quote

10-04-2023, 06:17 AM	#2
ssjr0498 New Member 2 Rep 6 Posts Drives: x1 xdrive 20d Msport Join Date: Jul 2023 Location: India iTrader: (0)	Did you install it? What were the observations? I'm planning to do the same.
	Appreciate 0 Quote

10-04-2023, 01:18 PM	#3
kubax86 Brigadier General 1793 Rep 3,062 Posts Drives: M2 Join Date: Jul 2017 Location: World iTrader: (8)	You require: WiFi antenna, CID Voltage Converter (to 8-8.2V), turning 180 degrees USB Cable and in some cases wiring Ethernet is required (from Quadlock to OABR) That's hardware, from software - you require coding, proper software to support APIX1 screen which you'll be using (unless you swap to touchscreen which is APIX2) That's all P.S. can help with coding if needed __________________ Apple CarPlay Fullscreen for NBTEVO / ENTRYNAV2 / Anti-Dazzle F/G CS FLASH G8X /GTS FLASH F8X / F8X Ultimate PACK / NBTEVO iDrive 6 FLASH iDrive Firmware Update + CarPlay Fullscreen -> Video Process Visit BIMMER-REMOTE.com - 10% OFF with BIMMERPOST_10 promocode info@bimmer-remote.com or PM
	Appreciate 0 Quote

10-06-2023, 04:20 AM	#4
pepe1234 New Member 2 Rep 18 Posts Drives: X5 G05, X1 F48 Join Date: Dec 2021 Location: PL iTrader: (0)	I didn't install it yet, I sent my HU to service because I bought it with HDD issue I wasn't able to connect HDD to change VIN
	Appreciate 0 Quote

10-12-2023, 08:44 AM	#5
pepe1234 New Member 2 Rep 18 Posts Drives: X5 G05, X1 F48 Join Date: Dec 2021 Location: PL iTrader: (0)	kubax86 Can I ask you for relevant Psdzdata to downgrade NbtEvo to 18-03? Mine now is 19-03 and screen not working properly
	Appreciate 0 Quote