01-15-2022, 07:31 AM | #1 |
New Member
0
Rep 7
Posts |
x1 f48 6,5 => 8.8
Hello everyone, I'm new to the forum.
I don't know anything about short coding I have a 2017 x1 I have a 6.5 screen I wanted to switch it to 8.8 but black screen with "no signal" I coded with bimmercode but still the same. You have any ideas ? here is what i have original https://ibb.co/QPkZs08 https://ibb.co/qJGccJf is the one I want to put in place https://ibb.co/Tq8Z9MM |
01-15-2022, 10:57 AM | #2 | |
Captain
202
Rep 800
Posts |
Quote:
in short, your HU is apix1 - this screen you got is apix2, so voltages are different hence 'no signal'. you either need an apix1 8.8 screen, new HU that handled apix2, or get the cable. i opted for the apix1 screen as i was in the same boat as you. Once i got apix1 8.8 screen, no issues at all. you'll need something like this. it should work but i'd rather be safe & just get apix1 screen - https://www.ebay.com/itm/VOLTAGE-CON...-127632-2357-0 |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|