BMW
X1 / X2
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW X1 (F48) and X2 (F39) Forums General BMW X1 Forum (F48) BMW E-sys coding for the f48 x1

Post Reply
 
Thread Tools Search this Thread
      03-23-2019, 08:53 AM   #595
PurePulse64
Private First Class
United_States
52
Rep
105
Posts

Drives: 2017 BMW X1
Join Date: Sep 2018
Location: Charlotte, NC

iTrader: (0)

Quote:
Originally Posted by Slim125 View Post
I do not quite understand in English.

I want to change the FDL option to MINI F56. For no-option 5df there, but they say you can encode it as X1 F48 and earn Stop & Go.

That's why I wanted to see what parameters are changing NCD Tool.
You should see F48 in the list on the CAFD tool. You won't see 5DF on the F56 (mini)
Appreciate 0
      03-28-2019, 01:19 PM   #596
pandauk
Private First Class
28
Rep
109
Posts

Drives: BMW X1
Join Date: Sep 2018
Location: UK

iTrader: (0)

Anyone had luck with the HUD turnsignals?

1- Code KOMBI / HUD_PIA_BLINKER = aktiv
2- Code KOMBI / BLINKER_HUD_ENABLE = aktiv
3- Code HU_NBT / HUD_TURNSIGNAL = aktiv

And still not showing - this is on a Oct 2018 F48 with black instrument panel
Appreciate 0
      03-28-2019, 04:19 PM   #597
PurePulse64
Private First Class
United_States
52
Rep
105
Posts

Drives: 2017 BMW X1
Join Date: Sep 2018
Location: Charlotte, NC

iTrader: (0)

Quote:
Originally Posted by pandauk View Post
Anyone had luck with the HUD turnsignals?

1- Code KOMBI / HUD_PIA_BLINKER = aktiv
2- Code KOMBI / BLINKER_HUD_ENABLE = aktiv
3- Code HU_NBT / HUD_TURNSIGNAL = aktiv

And still not showing - this is on a Oct 2018 F48 with black instrument panel
I have tried several different things to get that working. From my understanding you won't be able to get it. -- I believe it may be due to the HU
Appreciate 0
      03-28-2019, 09:41 PM   #598
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by PurePulse64 View Post
I have tried several different things to get that working. From my understanding you won't be able to get it. -- I believe it may be due to the HU
HUD_BLINKER_ENABLE?
HUD_TURNSIGNAL?
HUD_PIA_BLINKER?
Appreciate 1
pandauk28.00
      03-29-2019, 02:11 AM   #599
Slim125
New Member
0
Rep
21
Posts

Drives: BMW
Join Date: Aug 2016
Location: Br

iTrader: (0)

Quote:
Originally Posted by PurePulse64 View Post
You should see F48 in the list on the CAFD tool. You won't see 5DF on the F56 (mini)
Right. Therefore, I ask you to tell which parameters change for F48. Big thanks!
Appreciate 0
      03-29-2019, 04:19 AM   #600
pandauk
Private First Class
28
Rep
109
Posts

Drives: BMW X1
Join Date: Sep 2018
Location: UK

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
HUD_BLINKER_ENABLE?
HUD_TURNSIGNAL?
HUD_PIA_BLINKER?
These are the 3 things I tried enabling to no avail.

Not the end of the world - am very happy I got the 5 blinks working, that's good enough
Appreciate 0
      03-29-2019, 10:10 AM   #601
PurePulse64
Private First Class
United_States
52
Rep
105
Posts

Drives: 2017 BMW X1
Join Date: Sep 2018
Location: Charlotte, NC

iTrader: (0)

Quote:
Originally Posted by Slim125 View Post
Right. Therefore, I ask you to tell which parameters change for F48. Big thanks!
I will try and pull what mine shows, keep in mind my parameters will vary from yours due to features/year/setup
Appreciate 0
      03-29-2019, 10:10 AM   #602
PurePulse64
Private First Class
United_States
52
Rep
105
Posts

Drives: 2017 BMW X1
Join Date: Sep 2018
Location: Charlotte, NC

iTrader: (0)

Quote:
Originally Posted by pandauk View Post
These are the 3 things I tried enabling to no avail.

Not the end of the world - am very happy I got the 5 blinks working, that's good enough
I tried those as well and it was a no-go. on the HUD Turn signal.
Appreciate 1
Almaretto2372.50
      03-30-2019, 08:35 AM   #603
Takabo
Private
Takabo's Avatar
Japan
49
Rep
69
Posts

Drives: G21 320d xDrive Touring MSport
Join Date: Mar 2019
Location: Osaka, Japan

iTrader: (0)

Hello!

Have you tried changing the default distance of ACC and easy entry of the power seat with the X1 (F48) / X2 (F39) manufactured in 2018?
Appreciate 0
      03-30-2019, 10:00 AM   #604
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

I do not havE power seats so have not tested the settings for F48
My cheat sheet shows
Driver seat easy entry/access
-> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
-> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
Do search to find exact module location, think 3000 is in main HU, suspect other is seat module itself.

If you play around with the werte hex values for seat travel and rear seat safety room you can get the front seat to travel back a considerable distance. I am obliged to mention on health and safety grounds for the “idiots” that remove too much rear seat safety room and you could cause crush injury to a rear passenger.

Just saying, you know —> for those people that need “do not place live animals in this microwave” stickers otherwise pet bath time ends in tragedy.

Last edited by MJE60; 03-30-2019 at 10:16 AM..
Appreciate 1
Takabo49.00
      03-30-2019, 11:56 AM   #605
Takabo
Private
Takabo's Avatar
Japan
49
Rep
69
Posts

Drives: G21 320d xDrive Touring MSport
Join Date: Mar 2019
Location: Osaka, Japan

iTrader: (0)

Quote:
Originally Posted by MJE60 View Post
I do not havE power seats so have not tested the settings for F48
My cheat sheet shows
Driver seat easy entry/access
-> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
-> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
Do search to find exact module location, think 3000 is in main HU, suspect other is seat module itself.

If you play around with the werte hex values for seat travel and rear seat safety room you can get the front seat to travel back a considerable distance. I am obliged to mention on health and safety grounds for the “idiots” that remove too much rear seat safety room and you could cause crush injury to a rear passenger.

Just saying, you know —> for those people that need “do not place live animals in this microwave” stickers otherwise pet bath time ends in tragedy.

Thank you for the your cheat sheet information.

But...
For some reason, I could not find the below on My F39.

3012 -> EAH_VERFAHRWEG_SLV_PHYS
3012 -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS

In the EAH only have "EAH_0_42_255".

Do you have any other ideas?

P.S.
I found "EINAUSSTIEEGSHILFE = Modus_FA_SLV".
Appreciate 0
      03-30-2019, 02:41 PM   #606
Almaretto
Major General
Almaretto's Avatar
2373
Rep
8,364
Posts

Drives: Test Vehicles
Join Date: Dec 2015
Location: Mountain View, CA

iTrader: (0)

Quote:
Originally Posted by Takabo View Post
Thank you for the your cheat sheet information.

But...
For some reason, I could not find the below on My F39.

3012 -> EAH_VERFAHRWEG_SLV_PHYS
3012 -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS

In the EAH only have "EAH_0_42_255".

Do you have any other ideas?

P.S.
I found "EINAUSSTIEEGSHILFE = Modus_FA_SLV".
Use updated mapping found in E-sysX or Launcher Pro 3.2.
Appreciate 1
Takabo49.00
      03-30-2019, 02:45 PM   #607
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Quote:
Originally Posted by Takabo View Post
Thank you for the your cheat sheet information.

But...
For some reason, I could not find the below on My F39.

3012 -> EAH_VERFAHRWEG_SLV_PHYS
3012 -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS

In the EAH only have "EAH_0_42_255".

Do you have any other ideas?

P.S.
I found "EINAUSSTIEEGSHILFE = Modus_FA_SLV".
This is courtesy of CliveL who coded his F48 and increased seat travel.

These are the settings For changing ‘ Easy Entry": the -> shows changed values
So for einaussteigshilfe change from nicht aktiv to modus_fa_slv

SM2 IS THE MODULE LOCATION FOR HIS CHANGES.

SM2 - 3000 - EINAUSSTIEGSHILFE = nicht_aktiv (default) -> Modus_FA_SLV (Easy Entry seats)
SM2 - 3012 EAH - EAH_VERFAHRWEG_SLV_PHYS = Werte 00, 3C (60) -> 00, 32 (50)
SM2 - 3012 EAH - EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte 00, 64 (100)-> 00, 3C (60)

The arrow (->) indicates the value CliveL changed TO, from the original value.

Please note, I do not have this option but if you cannot find module or codes, check you actually have electric memory seats otherwise coding will not help, hardware is also required.
Appreciate 1
Takabo49.00
      04-01-2019, 02:55 AM   #608
Takabo
Private
Takabo's Avatar
Japan
49
Rep
69
Posts

Drives: G21 320d xDrive Touring MSport
Join Date: Mar 2019
Location: Osaka, Japan

iTrader: (0)

Hello!

Easy entry of the power seat was activated only with the following settings.

BIMMERCODE
ECUs → Seat Module Driver(CFAS_PLX_1)→ Expert Mode → EINAUSSTIEGSHILFE → Modus_FA_SLV(Default:nicht_aktiv)

But...
The seat position of my driving position is more behind (^ ^ ;;

It seems that I do not need Easy Entry.


https://youtu.be/vqNHXLkCT9Q

Thank you for teaching me.

Last edited by Takabo; 04-01-2019 at 03:13 AM..
Appreciate 0
      04-01-2019, 03:19 AM   #609
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Yes, einausstiegshilfe IS easy entry (the word is German for entry exit assistance). You have activated easy entry. Congratulations.
If you still want to adjust how much the seat moves back then other two settings can be adjusted. If you are struggling to find settings in E-sys then consider using Bimmercode.

Last edited by MJE60; 04-03-2019 at 03:14 AM..
Appreciate 0
      04-03-2019, 05:14 AM   #610
Slim125
New Member
0
Rep
21
Posts

Drives: BMW
Join Date: Aug 2016
Location: Br

iTrader: (0)

Quote:
Originally Posted by PurePulse64 View Post
I will try and pull what mine shows, keep in mind my parameters will vary from yours due to features/year/setup
Good day. Watched?
Appreciate 0
      04-13-2019, 03:09 AM   #611
Slim125
New Member
0
Rep
21
Posts

Drives: BMW
Join Date: Aug 2016
Location: Br

iTrader: (0)

Can anyone see in his NCD / CAFD Tool which parameters change for the 5DF options.
Appreciate 0
      04-13-2019, 04:46 AM   #612
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Quote:
Originally Posted by Slim125 View Post
Can anyone see in his NCD / CAFD Tool which parameters change for the 5DF options.
There are a number of changes but perhaps the most important one is the fact that option 5DF (for F48) works through the SAS module/Ecu and has additional pressure sensor fitted in braking system. If you are trying to retrofit 5DF into F48 then you will need additional Ecu , wiring loom modification and at least one other part in braking system as well as new steering wheel switch.
I found NCD/CAFD tool does not well well for F48, the suggested parameter changes in many cases were wrong and out of date when I checked for change from 6UN to 6UP. Look at thread from PurePulse64 he posted more information on 5Df and also said tool was not totally helpful.

Last edited by MJE60; 04-13-2019 at 05:20 AM..
Appreciate 0
      04-13-2019, 11:07 PM   #613
Takabo
Private
Takabo's Avatar
Japan
49
Rep
69
Posts

Drives: G21 320d xDrive Touring MSport
Join Date: Mar 2019
Location: Osaka, Japan

iTrader: (0)

iDrive Navi AutoZoom succeeded.

I have the following settings.

BIMMERCODE
ECUs → Headunit (HU_NBT_EVO) → Expert Mode → NAVI_AUTOZOOM(Search) → aktiv (Default: nicht_aktiv)

And if you set the destination in the navigation ...

iDrive Navi AutoZoom succeeded.
Are there any other successful people?


P.S.
AUTO_MAP_ZOOM has not changed the setting.
Attached Images
 

Last edited by Takabo; 04-13-2019 at 11:27 PM..
Appreciate 0
      04-14-2019, 11:06 AM   #614
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Quote:
Originally Posted by Takabo View Post
I have the following settings.

BIMMERCODE
ECUs → Headunit (HU_NBT_EVO) → Expert Mode → NAVI_AUTOZOOM(Search) → aktiv (Default: nicht_aktiv)

And if you set the destination in the navigation ...

iDrive Navi AutoZoom succeeded.
Are there any other successful people?


P.S.
AUTO_MAP_ZOOM has not changed the setting.
Are you sure your HU is NBTevo? And if yes is your navigation professional (option S609a)? I only ask because most F48 & F39 in the world have HU Entrynav and have business navigation.
Appreciate 1
Takabo49.00
      04-14-2019, 09:52 PM   #615
Takabo
Private
Takabo's Avatar
Japan
49
Rep
69
Posts

Drives: G21 320d xDrive Touring MSport
Join Date: Mar 2019
Location: Osaka, Japan

iTrader: (0)

Quote:
Originally Posted by MJE60 View Post
Are you sure your HU is NBTevo? And if yes is your navigation professional (option S609a)? I only ask because most F48 & F39 in the world have HU Entrynav and have business navigation.
Hello!

My F39(October 2018 production) version of Navi is as the picture.
All Japanese specifications of BMW F 39 & F 48 are this.

When I checked the option at VIN, it was as follows.

——-
609 Navigation System Professional Navigationssystem Professional
610 Head Up Display Head-up Display
——-

Are Japanese specifications different from other countries' navigation specifications?
Attached Images
 
Appreciate 1
MJE60678.00
      04-15-2019, 02:32 AM   #616
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Quote:
Originally Posted by Takabo View Post
Hello!

My F39(October 2018 production) version of Navi is as the picture.
All Japanese specifications of BMW F 39 & F 48 are this.

When I checked the option at VIN, it was as follows.

——-
609 Navigation System Professional Navigationssystem Professional
610 Head Up Display Head-up Display
——-

Are Japanese specifications different from other countries' navigation specifications?
Hello
Yes your car has different HU to most X1 in other countries. X1 (F48’s) in most countries have business navigation and Entrynav HU.

You have an NBTevo HU with optio s609a professional navigation (also why you can zoom maps) which has much better graphics and quality navigation. This also means you are able to easily buy fsc codes from 3rd party sellers. If you do not have CarPlay as an example , you can install easily.
Appreciate 1
Takabo49.00
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:53 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST