03-09-2019, 11:05 PM | #1 |
New Member
12
Rep 15
Posts |
New X2 With Gtechniq coating, tips for dash camera and Carplay10.25" monitor retrofit
Black sapphire color with M performance grille mod.
Coated with Gtechniq Serum Ultra 10H + EVO 7H DIY dash cam will be follow in the next post Last edited by Eqwoot; 03-19-2019 at 08:49 PM.. |
03-09-2019, 11:22 PM | #2 |
New Member
12
Rep 15
Posts |
For the Dash camera I have used the fuse 55 for VCC power because it instant shut off the camera once the ignition is off and go into parking mode instead of 5 mins later. For ACC constant power I have used fuse 104 as suggested on other thread.
Some tips also mentioned before: 1) no need to remove the whole glove box, there is a small piece of cover under the glove box where after removed you can find place for ground and access to fuse 104. 2) to install the back camera you can remove the cover the middle seat belt and you will have access to put a wire to the hood going to the trunk. I have took some photos and it should help. Last edited by Eqwoot; 03-09-2019 at 11:40 PM.. |
Appreciate
1
JustChris17487.50 |
03-19-2019, 08:48 PM | #3 |
New Member
12
Rep 15
Posts |
Since Asia version has a cheap version of ID6.0 without navi and Carplay, i got myself a retrofit to EVO with a new 10.25" monitor.
For other American owner, CarPlay can be easily enable by plugging a USB to the console but Asia model don't have this choice. |
Appreciate
0
|
05-08-2019, 02:40 AM | #6 |
Registered
0
Rep 1
Posts |
Hi there,
I didn't realise you could get there were places that can retrofit a bigger screen and idrive with Carplay in HK. Could you send details of the where you got it done? (Also roughly how much it cost). Many Thanks! |
Appreciate
0
|
05-08-2019, 04:22 AM | #7 | |
New Member
12
Rep 15
Posts |
Quote:
btw they offer stage 1 remap to 260hp too. I haven't tried but they seems to know what they are doing. |
|
Appreciate
1
ben_gb0.00 |
Post Reply |
Bookmarks |
|
|