BMW E-sys coding for the f48 x1

Vogit · 10-09-2016, 01:29 PM

Quote:

Originally Posted by E90Fleet

The sensors usually dont activate immediately when you lock the car.
Did you wait a little before moving?
Weer the windows and roof closed when you locked it?

About 45 seconds
Everything closed.

Will try again with longer pause...

makpowa · 10-12-2016, 01:58 PM

Does anyone already coded the ecopro mode by default?

Almaretto · 10-12-2016, 10:34 PM

Quote:

Originally Posted by makpowa

Does anyone already coded the ecopro mode by default?

I think the settings are in DSC.

lrd300 · 10-13-2016, 07:00 AM

Coding for ECOpro mode by default should be the below code. But I haven't tested yet, so not sure if it works or not.

BDC_BODY 3221 PfFesMaster FesInitMode Werte=07

drive mode: 03 = Comfort, 04 = Sports, 07 = Eco Pro

jyabar · 11-11-2016, 09:37 AM

Quote:

Originally Posted by ScottishX1

Managed to code the EBT option 6NS to my X1 F48

Gives me full office functions including pictures

Now i have 2 iPhones 1 +2 and an iPad Air2 as bluetooth audio all at the same time

3 apple devices at once lol

Hello ScotttishX1. Have you tried the correct functionality of the Phone 2? As I understand, Phone 2 requires a second microphone located in the passenger seat.

makpowa · 11-14-2016, 04:14 AM

Quote:

Originally Posted by jyabar

Hello ScotttishX1. Have you tried the correct functionality of the Phone 2? As I understand, Phone 2 requires a second microphone located in the passenger seat.

You can disable it in Esys to avoid errors, and then all works fine.

In microphone you have to select single instead of dual.

ScottishX1 · 11-15-2016, 04:17 AM

Quote:

Originally Posted by jyabar

Hello ScotttishX1. Have you tried the correct functionality of the Phone 2? As I understand, Phone 2 requires a second microphone located in the passenger seat.

I never changed anything from 2 mic's to 1 mic, not even sure where that would be but i have both phones working, i can choose what phone to use to make an outgoing call and answer an incoming call for either without changing anything.

ScottishX1 · 11-15-2016, 04:19 AM

Quote:

Originally Posted by makpowa

You can disable it in Esys to avoid errors, and then all works fine.

In microphone you have to select single instead of dual.

I didnt do this, not even sure how to but i have both phones working fine incoming an outgoing without changing anything on car or phones.

makpowa · 11-15-2016, 02:32 PM

Quote:

Originally Posted by ScottishX1

I didnt do this, not even sure how to but i have both phones working fine incoming an outgoing without changing anything on car or phones.

But then, for sure you have an error code if you log the car .

Vogit · 11-15-2016, 02:36 PM

Quote:

Originally Posted by makpowa

But then, for sure you have an error code if you log the car .

I suspect UK spec cars have both microphones: mine certainly has the grilles in the roof lining on both sides. I haven't tried coding Enhanced Bluetooth yet...

makpowa · 11-15-2016, 03:00 PM

Quote:

Originally Posted by Vogit

I suspect UK spec cars have both microphones: mine certainly has the grilles in the roof lining on both sides. I haven't tried coding Enhanced Bluetooth yet...

Can you check if the passenger one is blind?

Almaretto · 11-15-2016, 03:01 PM

Quote:

Originally Posted by ScottishX1

I never changed anything from 2 mic's to 1 mic, not even sure where that would be but i have both phones working, i can choose what phone to use to make an outgoing call and answer an incoming call for either without changing anything.

Quote:

Originally Posted by Vogit

I suspect UK spec cars have both microphones: mine certainly has the grilles in the roof lining on both sides. I haven't tried coding Enhanced Bluetooth yet...

Depending on which option codes your car has as well as year, you may or may not receive error.

The grills in passenger lining are present whether there is mic or not.

jpwakan · 11-22-2016, 10:12 AM

Hi,

I need your help for coding.
Today I changed the Start and Stop for remember last setting, doors handles lights in reverse with success.
For the turn signal, unable to change werte value from 02 to 04.
I have BDC_BODY but no more the save icon.
I had my car since January 2016, built in December 2015 with HUD ( may be it's due to HUD ...
Any help is welcome
Thanks
JP

nikbila · 11-24-2016, 10:00 PM

I'm wondering on how to code the digital speed as well? for some reason after picking F56, the Kombi folder, under 3000 folder, the rest of the folders don't display the names?

Also, anyone know how to code the fog lights to not show an error? Just replaced them with LEDs.

Almaretto · 12-12-2016, 02:35 AM

Quote:

Originally Posted by nikbila

I'm wondering on how to code the digital speed as well? for some reason after picking F56, the Kombi folder, under 3000 folder, the rest of the folders don't display the names?

Also, anyone know how to code the fog lights to not show an error? Just replaced them with LEDs.

If you are using Premium Launcher, you need to choose correct chassis. Otherwise, FDL-Editor will not show properly mapped CAF's.

Check out F15 Cheat Sheet for LED's

bulaviti · 12-14-2016, 11:18 PM

Sharing my coding for turn signal blink for my May built X1 25i MSport that I did this week:

Not changed:
Name: Capture.PNG
Views: 1670
Size: 19.3 KB

Changed from 2 to 4:
Name: Capture2.PNG
Views: 1682
Size: 23.7 KB

Works fine with 5 blinks now instead of 3.

Almaretto · 12-15-2016, 01:20 AM

Quote:

Originally Posted by bulaviti

Sharing my coding for turn signal blink for my May built X1 25i MSport that I did this week:

Not changed:
Attachment 1542270

Changed from 2 to 4:
Attachment 1542272

Works fine with 5 blinks now instead of 3.

If your vehicle gets updated to F025-16-07-501 or above, you will loose ability to code this feature.

bulaviti · 12-15-2016, 02:06 AM

Quote:

Originally Posted by Almaretto

If your vehicle gets updated to F025-16-07-501 or above, you will loose ability to code this feature.

Doh!

I guess at some point (service) the upgrade will be done by BMW - thanks for the alert.

Almaretto · 12-15-2016, 02:24 AM

Quote:

Originally Posted by bulaviti

Doh!

I guess at some point (service) the upgrade will be done by BMW - thanks for the alert.

I just tested on X5:

PIA_DEFAULT_TIPPBLINKEN
00 = 1 blink
01 = 3 blinks
02 = 5 blinks
All other tested numbers revert back to 00 = 1 blink.

bulaviti · 12-15-2016, 06:06 PM

Quote:

Originally Posted by Almaretto

If your vehicle gets updated to F025-16-07-501 or above, you will loose ability to code this feature.

BTW, is there a way to find out what the vehicle's current version is?

Almaretto · 12-15-2016, 06:19 PM

Quote:

Originally Posted by bulaviti

BTW, is there a way to find out what the vehicle's current version is?

I-Step

bulaviti · 12-16-2016, 08:14 PM

Quote:

Originally Posted by Almaretto

I-Step

Happy Holidays to everyone and drive safe!

10-12-2016, 01:58 PM	#178
makpowa New Member 0 Rep 14 Posts Drives: X1 F48 xLINE 18sDrive Join Date: Oct 2016 Location: Spain iTrader: (0)	Does anyone already coded the ecopro mode by default?
	Appreciate 0 Quote

10-13-2016, 07:00 AM	#180
lrd300 New Member 42 Rep 18 Posts Drives: BMW X1 M Sport Join Date: Apr 2016 Location: Malta iTrader: (0)	Coding for ECOpro mode by default should be the below code. But I haven't tested yet, so not sure if it works or not. BDC_BODY 3221 PfFesMaster FesInitMode Werte=07 drive mode: 03 = Comfort, 04 = Sports, 07 = Eco Pro
	Appreciate 0 Quote

11-22-2016, 10:12 AM	#189
jpwakan Enlisted Member 3 Rep 39 Posts Drives: X1 F48 25i Join Date: Aug 2016 Location: France iTrader: (0) Garage List 2009 Wakan [9.00] 2015 BMW X1 F48 25i ... [0.00]	Hi, I need your help for coding. Today I changed the Start and Stop for remember last setting, doors handles lights in reverse with success. For the turn signal, unable to change werte value from 02 to 04. I have BDC_BODY but no more the save icon. I had my car since January 2016, built in December 2015 with HUD ( may be it's due to HUD ... Any help is welcome Thanks JP __________________ http://wakan-hundred.forumactif.org Last edited by jpwakan; 11-22-2016 at 10:33 AM..
	Appreciate 0 Quote

11-24-2016, 10:00 PM	#190
nikbila Enlisted Member 12 Rep 32 Posts Drives: '20 BMW X3 (G01) Join Date: Dec 2012 Location: New York iTrader: (0)	I'm wondering on how to code the digital speed as well? for some reason after picking F56, the Kombi folder, under 3000 folder, the rest of the folders don't display the names? Also, anyone know how to code the fog lights to not show an error? Just replaced them with LEDs.
	Appreciate 0 Quote

12-14-2016, 11:18 PM	#192
bulaviti New Member 0 Rep 8 Posts Drives: X1 25i M Sport Join Date: Dec 2016 Location: Sydney iTrader: (0)	Sharing my coding for turn signal blink for my May built X1 25i MSport that I did this week: Not changed: Changed from 2 to 4: Works fine with 5 blinks now instead of 3.
	Appreciate 0 Quote