06-28-2020, 11:02 AM | #24 | |
Private
49
Rep 69
Posts |
Quote:
Please try (^_−)−☆ BDC_BODY >3065 LceLampMapping4, ED> MAPPING_BRAKEFORCED_2_L_OUTPUT = 18 (Initial state: off = 00) MAPPING_BRAKEFORCED_2_L_FUNCTION = 06 (Initial state: bfd = 0D) MAPPING_BRAKEFORCED_2_L_PRIORITY = priority_2 = 02 (Initial state: priority_1 = 01) MAPPING_BRAKEFORCED_2_L_FIXED_PWM = fixed = 01 (initial state: pwm = 00) BDC_BODY >3065 LceLampMapping4, ED> MAPPING_BRAKEFORCED_2_R_OUTPUT = 19 (Initial state: off = 00) MAPPING_BRAKEFORCED_2_R_FUNCTION = 07 (initial state: bfd = 0D) MAPPING_BRAKEFORCED_2_R_PRIORITY = priority_2 = 02 (Initial state: priority_1 = 01) MAPPING_BRAKEFORCED_2_R_FIXED_PWM = fixed = 01 (initial state: pwm = 00)
__________________
BMW 320d xDrive Touring M Sport(G21) Production Plant: Munich, Production Date: 2021-02-25 |
|
Appreciate
1
wcs2229170.50 |
08-25-2020, 01:44 AM | #26 |
Captain
50
Rep 753
Posts |
Just curious.. On the pre-lci X1 where are the brake force lights?
In my 2017 X1 I noticed in bimmercode the regular brake lights are halogen but brake force is LED. I don't see any LED's in my tail light units except for the running lights though? Zzzz |
Appreciate
0
|
08-27-2020, 02:54 AM | #27 |
Private First Class
80
Rep 139
Posts |
What do you mean? You don't see the settings?
|
Appreciate
0
|
08-27-2020, 03:48 AM | #28 |
Captain
50
Rep 753
Posts |
No I mean physically on the car. The outer tail lights house the turn signal at the top and brake bulb at the bottom. The inner tail lights house the reverse bulb and a rear fog light bulb. All these are halogen. There is also the parking light which is the LED light tube.
But where is the factory brake force display LED bulb? I'm talking about the factory function where a second LED bulb engages along with the regular halogen brake light bulb under hard deceleration that BMW has had on their cars for the past 20 years. Not the flashing lights that can be coded. When I check the factory coding it says my brake force display is LED. But I don't know where it is in the tail light housing. |
Appreciate
0
|
08-28-2020, 09:55 PM | #29 | |
Private First Class
80
Rep 139
Posts |
Quote:
|
|
Appreciate
0
|
08-30-2020, 11:14 AM | #30 | |
First Lieutenant
147
Rep 304
Posts |
Quote:
|
|
Appreciate
0
|
08-30-2020, 11:44 AM | #31 | |
Captain
50
Rep 753
Posts |
Quote:
|
|
Appreciate
0
|
12-31-2020, 06:10 PM | #32 |
Private
22
Rep 81
Posts |
|
Appreciate
0
|
12-31-2020, 07:09 PM | #33 | |
Private First Class
80
Rep 139
Posts |
Quote:
Btw, I need to update this. My right LED DRL started to dim, I got it fixed since I still have my warranty but I'm assuming its because of this. So, I will no longer recommend coding the DRL's, the fog however is just a quick change led bulb. |
|
Appreciate
0
|
12-31-2020, 07:35 PM | #34 |
Private
22
Rep 81
Posts |
|
Appreciate
0
|
12-31-2020, 08:25 PM | #35 | |
Private First Class
80
Rep 139
Posts |
Quote:
BDC_BODY 3065 LceLampMapping4: MAPPING_BREMSL_2_L_OUTPUT = nsl_l MAPPING_BREMSL_2_R_OUTPUT = nsl_r |
|
Appreciate
0
|
01-01-2021, 12:38 AM | #36 |
Private
22
Rep 81
Posts |
|
Appreciate
0
|
07-28-2021, 09:43 AM | #37 |
Private
30
Rep 99
Posts |
As you guys seem to be pretty well informed on tail lights, I have a question for you: I have replaced rear halogen lights with leds but am missing a wire for the outer DRLs, do you think it would be possible (until I have time to install the missing wire) to use the "normal" rear light wire by swapping the pin in the connector?
They're all already coded to LED anyway... Thanks for any help |
Appreciate
0
|
08-03-2021, 02:22 PM | #38 | |
Private
30
Rep 99
Posts |
Quote:
Any ideas on how I can work around this? I was thinking fog lights as brake lights and rear tail lights always on… I will try coding above for fog lights as brake lights. Does anyone know how to code rear tail lights always on? Thanks |
|
Appreciate
0
|
08-04-2021, 07:36 AM | #39 | |
Private First Class
80
Rep 139
Posts |
Quote:
Daylight left tail light BDC_BODY> 3064 LceLampMapping3, F7> MAPPING_TAGFAHRL_1_H_L_OUTPUT = sl_l = 14 (initial state: off = 00) OPTIONS (sl_l = 14, nsl_l = 1C, bfd_l = 1A, off = 00) Daylight right outtail light BDC_BODY> 3064 LceLampMapping3, F7> MAPPING_TAGFAHRL_1_H_R_OUTPUT = sl_r = 15 (initial state: off = 00) OPTIONS (sl_r = 15, nsl_r = 1D, bfd_r = 1B, off = 00) Daylight left inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_TAGFAHRL_2_H_L_OUTPUT = sl_2_l = 16 (initial state: off = 00) OPTIONS (bl_l = 18, sl_2_l = 16, off = 00) Daylight right inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_TAGFAHRL_2_H_R_OUTPUT = sl_2_r = 17 (Initial state: off = 00) OPTIONS (bl_r = 19, sl_2_r = 17, off = 00) I think this is what I used to keep the rear DRL always on. |
|
Appreciate
0
|
08-04-2021, 08:08 AM | #40 | ||
Private
30
Rep 99
Posts |
Quote:
I have already coded DRLs always on, this would code the standard tail light as a drl if I understood correctly? Thanks Attached is current state, when the lights are on when it's dark I also have the inner standard bulbs always on, would be good to turn these off too. Thanks for all your help! |
||
Appreciate
0
|
07-19-2022, 06:49 PM | #41 | |
New Member
0
Rep 9
Posts |
Quote:
|
|
Appreciate
0
|
07-20-2022, 12:04 AM | #42 |
New Member
0
Rep 9
Posts |
|
Appreciate
0
|
07-20-2022, 03:11 AM | #43 | |
Private First Class
80
Rep 139
Posts |
Quote:
+Remember, with the bars code there's a high chance of failure of the LED module. FOG as brakes: BDC_BODY 3065 LceLampMapping4: MAPPING_BREMSL_2_L_OUTPUT = nsl_l MAPPING_BREMSL_2_R_OUTPUT = nsl_r OTHER CODES Enable rear daylight ++ Daylight left tail light BDC_BODY> 3064 LceLampMapping3, F7> MAPPING_TAGFAHRL_1_H_L_OUTPUT = sl_l = 14 (initial state: off = 00) OPTIONS (sl_l = 14, nsl_l = 1C, bfd_l = 1A, off = 00) ++ Daylight right outtail light BDC_BODY> 3064 LceLampMapping3, F7> MAPPING_TAGFAHRL_1_H_R_OUTPUT = sl_r = 15 (initial state: off = 00) OPTIONS (sl_r = 15, nsl_r = 1D, bfd_r = 1B, off = 00) ++ Daylight left inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_TAGFAHRL_2_H_L_OUTPUT = sl_2_l = 16 (initial state: off = 00) OPTIONS (bl_l = 18, sl_2_l = 16, off = 00) ++ Daylight right inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_TAGFAHRL_2_H_R_OUTPUT = sl_2_r = 17 (Initial state: off = 00) OPTIONS (bl_r = 19, sl_2_r = 17, off = 00) + Turn signal of rear daylight ++ Daylight left tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_UNIVERSAL_5_OUTPUT = UNKNOWN = 14 (Initial state: off = 00) MAPPING_UNIVERSAL_5_FUNCTION = UNKNOWN = 06 (Initial state: off = 00) MAPPING_UNIVERSAL_5_PRIORITY = UNKNOWN = 00 (Initial state: priority_3 = 03) MAPPING_UNIVERSAL_5_PWM_1 = 100% = 64 (Initial state: 0V = 00) MAPPING_UNIVERSAL_5_FIXED_PWM = fixed = 01 (Initial state: do not touch) MAPPING_UNIVERSAL_5_ DIMMED = not_active = 00 (Initial state: do not touch) ++ Daylight right outtail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_UNIVERSAL_6_OUTPUT = UNKNOWN = 15 (Initial state: off = 00) MAPPING_UNIVERSAL_6_FUNCTION = UNKNOWN = 07 (Initial state: off = 00) MAPPING_UNIVERSAL_6_PRIORITY = UNKNOWN = 00 (Initial state: priority_3 = 03) MAPPING_UNIVERSAL_6_PWM_1 = 100% = 64 (Initial state: 0V = 00) MAPPING_UNIVERSAL_6_FIXED_PWM = fixed = 01 (Initial state: do not touch) MAPPING_UNIVERSAL_6_ DIMMED = not_active = 00 (Initial state: do not touch) ++ Daylight left inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_UNIVERSAL_3_OUTPUT = sl_2_l = 16 (initial state: off = 00) MAPPING_UNIVERSAL_3_PART_OF = off = 00 (Initial state: WLH_FMH_RL = B0) MAPPING_UNIVERSAL_3_FUNCTION = blinken_l = 06 (Initial state: off = 00) MAPPING_UNIVERSAL_3_PRIORITY = UNKNOWN = 00 (Initial state: priority_1 = 01) MAPPING_UNIVERSAL_3_PWM_1 = 100% = 64 (Initial state: 0V = 00) MAPPING_UNIVERSAL_3_FIXED_PWM = fixed = 01 (Initial state: do not touch) MAPPING_UNIVERSAL_3_ DIMMED = not_active = 00 (Initial state: do not touch) ++ Daylight right inner tail light BDC_BODY> 3065 LceLampMapping4, ED> MAPPING_UNIVERSAL_4_OUTPUT = sl_2_r = 17 (Initial state: off = 00) MAPPING_UNIVERSAL_4_PART_OF = off = 00 (Initial state: WLH_FMH_RL = B0) MAPPING_UNIVERSAL_4_FUNCTION = blinken_r = 07 (initial state: off = 00) MAPPING_UNIVERSAL_4_PRIORITY = UNKNOWN = 00 (Initial state: priority_1 = 01) MAPPING_UNIVERSAL_4_PWM_1 = 100% = 64 (Initial state: 0V = 00) MAPPING_UNIVERSAL_4_FIXED_PWM = fixed = 01 (Initial state: do not touch) MAPPING_UNIVERSAL_4_ DIMMED = not_active = 00 (Initial state: do not touch) Last edited by SDriver18i; 07-20-2022 at 03:20 AM.. |
|
Appreciate
0
|
07-20-2022, 10:50 PM | #44 | |
New Member
0
Rep 9
Posts |
Quote:
I tried the fog as brakes and nothing happened, also I forgot to tell i have a F30. Maybe need some adjustments to work The rear daylight turn code will blink the bars or the brakes ? My bars already coded to blink like the video, i searched a lot but can’t make the brakes blinks too. I saw that you used a universal mapping, just map the number “14” that means the number is related to the brakes or led bars? Maybe the member Takabo knows how it works? Sorry for many questions, thanks in advance. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|