10-06-2021, 10:14 AM | #1 |
I'm a newb...
3
Rep 10
Posts |
MirrorTap Radar Detector Wiring Issue
Hi all!
OK so I have done a bit of research on this issue, and in my previous x2 (2018 sDrive), I had no problems with powering my radar detector with a MirrorTap cable. However, on my new 2021 x2 (xDrive mSport), I cannot get 12V out of the same pins. For reference, this image is from another thread, but shows how I had the cable wired on my 2018 x2, which worked fine: From the 2021 x2 I just got, the wires' colors are different: Other side of the same plug: So I tried checking for 12V using the red wire as (+) and brown as (-), but didn't get 12V as expected. Has anyone had success tapping into this harness on a newer x2 for key-switched 12V power? Or any other suggestions on where to pull 12V from are appreciated. Thanks! |
Post Reply |
Bookmarks |
|
|