[ScottishX1]

Managed to code the EBT option 6NS to my X1 F48

Gives me full office functions including pictures

Now i have 2 iPhones 1 +2 and an iPad Air2 as bluetooth audio all at the same time 3 apple devices at once lol

[Ant802]

Originally Posted by ScottishX1

Managed to code the EBT option 6NS to my X1 F48

Gives me full office functions including pictures

Now i have 2 iPhones 1 +2 and an iPad Air2 as bluetooth audio all at the same time 3 apple devices at once lol

I coded this but wasn't sure what pictures meant. Have you managed to figure out what pictures does? It doesn't show any sent on iMessage on mine.

[ScottishX1]

Originally Posted by Ant802

I coded this but wasn't sure what pictures meant. Have you managed to figure out what pictures does? It doesn't show any sent on iMessage on mine.

No not yet, i presume its the same pictures that show up on my phone screen when someone calls me? will get a call arranged and find out

[hyperspeed]

Can someone check the default US Spec value for me on this line item?

It is under BDC BODY:
3020 - TCM_SMARTLOCK_DRIVINGREADINESS

is default figure activ or nicht_activ?

I coded for "Start car by pushing button (hold brake not needed)" and then the car would not turn over lol.

Now it turns over again after I changed SMARTLOCK_BRAKE back to activ, but I made the mistake of not writing down the default value of the other line before changing it.

Thanks so much!!!!

[Ant802]

Originally Posted by ScottishX1

No not yet, i presume its the same pictures that show up on my phone screen when someone calls me? will get a call arranged and find out

Please let me know

[ScottishX1]

Originally Posted by Ant802

Please let me know

Ok so pics don't show up in contacts or when someone calls so no idea what the pictures is actually for.

[ScottishX1]

Has anyone coded the rear led tail lights on with drl? i have my outer lights coded on but the tailgate lights remain off and not sure what body item needs changed for these to come on along withe the body led rear lights? the F30 has H1 and H2 but the F56 we use to code has only H1, do we know when we will have a specific F48 version to use for coding?

[hyperspeed]

Originally Posted by hyperspeed

Can someone check the default US Spec value for me on this line item?

It is under BDC BODY:
3020 - TCM_SMARTLOCK_DRIVINGREADINESS

is default figure activ or nicht_activ?

I coded for "Start car by pushing button (hold brake not needed)" and then the car would not turn over lol.

Now it turns over again after I changed SMARTLOCK_BRAKE back to activ, but I made the mistake of not writing down the default value of the other line before changing it.

Thanks so much!!!!

bumpin this request. anyone able to help? Thanks!!

[M-Nick]

Originally Posted by ScottishX1

Has anyone coded the rear led tail lights on with drl? i have my outer lights coded on but the tailgate lights remain off and not sure what body item needs changed for these to come on along withe the body led rear lights? the F30 has H1 and H2 but the F56 we use to code has only H1, do we know when we will have a specific F48 version to use for coding?

DRL Taillamp
BDC_BODY 3068 TFL_MODUS drl_s drl_s (100% parking light brightness), tfl_s (50% parking light brightness)
BDC_BODY 3064 MAPPING_TAGFAHRL_1_H_L_OUTPUT sl_l (Outer Part)
BDC_BODY 3064 MAPPING_TAGFAHRL_1_H_R_OUTPUT sl_r (Outer Part)
BDC_BODY 3065 MAPPING_TAGFAHRL_2_H_L_OUTPUT sl_2_l (Inner Part)
BDC_BODY 3065 MAPPING_TAGFAHRL_2_H_R_OUTPUT sl_2_r (Inner Part)

[ScottishX1]

Originally Posted by M-Nick

DRL Taillamp
BDC_BODY 3068 TFL_MODUS drl_s drl_s (100% parking light brightness), tfl_s (50% parking light brightness)
BDC_BODY 3064 MAPPING_TAGFAHRL_1_H_L_OUTPUT sl_l (Outer Part)
BDC_BODY 3064 MAPPING_TAGFAHRL_1_H_R_OUTPUT sl_r (Outer Part)
BDC_BODY 3065 MAPPING_TAGFAHRL_2_H_L_OUTPUT sl_2_l (Inner Part)
BDC_BODY 3065 MAPPING_TAGFAHRL_2_H_R_OUTPUT sl_2_r (Inner Part)

Perfect thanks for that all working now

[Ed_rx7]

Does someone offer a service of some sort for all this coding stuff in the uk? South of the country preferably ?

[ScottishX1]

Originally Posted by Ed_rx7

Does someone offer a service of some sort for all this coding stuff in the uk? South of the country preferably ?

TBH if you have a laptop and buy a £13 cable from amazon there is enough help and instruction on here to do it yourself but if you do want someone else to do it try here:

http://www.bmcoding.com/

They can do it remotely if you need.

[ScottishX1]

Or here: http://www.ultimatetuning.co.uk/bmw-x1-f48-2016-coding/

[Ed_rx7]

thanks

[CliveL]

Well thanks to this thread, and particularly ScottishX1, I've done my first ever BMW coding today!!

I've managed to add the Enhanced Bluetooth option (6NS) to allow several phones to connect at once, after working out the additional options in the iDrive to enable it on the extra phones. I've also got the mirrors folding in automatically when locking the car, and the radio switching off when opening the driver's door (something I was used to in the last E61).

There's a few more things to try in this thread, and on the cheat sheets, but I just wanted to say thanks!!

[hyperspeed]

has anyone coded for LED angel eye brightness when the xenons are on, and also when the turn signals are blinking? if yes please share, thanks!

[deathstrike]

After some coding i found that the start up M screen (coded) doesn't load up each time car is turn on. Its only now and then that it show. Most time its the green city pic of the NAV.

Does any one else have this problem?
Also the idrive disclaimer is coded off.

[PF1]

Originally Posted by deathstrike

After some coding i found that the start up M screen (coded) doesn't load up each time car is turn on. Its only now and then that it show. Most time its the green city pic of the NAV.

Does any one else have this problem?
Also the idrive disclaimer is coded off.

Yes I find this also and it's not a real problem as such.

It's just the car doesn't display the splash screen on every start and fast tracks to the Nav screen. The M screen comes up if you haven't driven the car for some time.

[CliveL]

After trawling through a huge F30 coding thread I found mention of an interesting option that I've just enabled on my X1 - Easy Entry. I didn't see it mentioned on this thread, hence the post.

This feature causes the electric seats (clearly this won't be much use if you don't have electric memory seats, option 459...) to move back a few inches when you open the driver's door after a trip, making it a bit easier to extricate yourself from under the steering wheel. When you get back in the car and close the door, the seat moves forward to its stored memory position for that driver's profile.

There are some thresholds you can change but I haven't played with them. Easy Entry doesn't actually do anything for my stored seat position as it's already a fair way back, but my wife's stored position is quite far forward, and the Easy Entry works on her profile. The seat goes back when opening the door

The option code for anyone interested is:

SM2 - 3000 - EINAUSSTIEGSHILFE = Modus_FA_SLV (default: nicht_aktiv)

Hope that might be useful to someone!

[Bill_P]

Originally Posted by CliveL

After trawling through a huge F30 coding thread I found mention of an interesting option that I've just enabled on my X1 - Easy Entry. I didn't see it mentioned on this thread, hence the post.

This feature causes the electric seats (clearly this won't be much use if you don't have electric memory seats, option 459...) to move back a few inches when you open the driver's door after a trip, making it a bit easier to extricate yourself from under the steering wheel. When you get back in the car and close the door, the seat moves forward to its stored memory position for that driver's profile.

There are some thresholds you can change but I haven't played with them. Easy Entry doesn't actually do anything for my stored seat position as it's already a fair way back, but my wife's stored position is quite far forward, and the Easy Entry works on her profile. The seat goes back when opening the door

The option code for anyone interested is:

SM2 - 3000 - EINAUSSTIEGSHILFE = Modus_FA_SLV (default: nicht_aktiv)

Hope that might be useful to someone!

Thanks Clive - it may prove useful in the future. I have not done any coding and more to the point my wife has not driven the X1 yet. However when she eventually does this may come in handy as she will have the seat a long way forward. I ordered electric memory seats for just this reason.

[landrumdh]

I would have sworn there used to be a google sheet here with various e-code options people have found? I just got my cable the other day and I was hoping to make some changes this weekend but I can't find the google sheet?

[bmtespar]

You can try a Mini F56 code sheet and a BMW F30 sheet although bear in mind that the F48 is neither and some things will not work.