05-03-2024, 02:40 AM | #13113 | |
Lieutenant Colonel
553
Rep 1,590
Posts |
Quote:
APIX1 is the older video signal and will not work with APIX2 and vice versa. I believe yours is APIX1 which should work ok with the NBT MMI. I would search the thread for DIP switch settings that others posted and fixed theirs. There are only a couple more setting options on that, not like infinitive. 11100000 what it should be. Try 01100000 or 00110000 Wild guess: 11110000, or 11000000 Unless your MCU file is messed up, or your CUST Version firmware is corrupt. But I would wait on that for the seller as they should have a better idea. Are you sure your MMI is for NBT? Any markings? I assume you cannot see the firmware either because of the blank screen
__________________
Help each other: if you manage to fix your issue (especially with help from this forum), don't be a d*ck and disappear. Follow-up by posting the solution so you can help others.
|
|
Appreciate
0
|
05-03-2024, 03:22 AM | #13114 | |
New Member
0
Rep 5
Posts |
Quote:
It seems that MMI menu is always shown correctly on the old 6.5 screen, no matter the dip switch combination (re-connected MMI every time I changed switches) : 00000000 11000000 11100000 11110000 but of course, the OEM menu is then not shown since I have coded it for 8.8. However, with the mentioned DIP switch positions I never managed to get it to work with bigger screen, as if the MMI is ignoring the dip switches (only change I saw was when switch 4 was ON, I couldn't exit MMI screen). I can additionally try the 01100000, as suggested. I took a picture of SW version with the old screen connected (see attachment), as for the device, the box it came in says EW-LBMCP-NBT02B |
|
Appreciate
0
|
05-03-2024, 05:05 AM | #13115 |
New Member
0
Rep 5
Posts |
fe7565 Thanks a lot for your help, I found the solution.
Apparently, I got a different HW version from the Andream seller - EW-LBMCP-NBT02B This version is different, so the correct dip switch position is this: 00000010 Unfortunately, I did not found updates for this version and it does not have the same options like "Use car BT" which I would like to use. I will talk to the seller because I don't like that this version does not have all the support and updates that are posted in this thread. |
Appreciate
0
|
05-03-2024, 05:17 AM | #13116 | |
Lieutenant Colonel
553
Rep 1,590
Posts |
Quote:
__________________
Help each other: if you manage to fix your issue (especially with help from this forum), don't be a d*ck and disappear. Follow-up by posting the solution so you can help others.
|
|
Appreciate
0
|
05-03-2024, 08:32 AM | #13117 |
New Member
12
Rep 12
Posts |
Following my last post, which described the experience and process of updating my Andream (EW_NBT_04X) (https://f30.bimmerpost.com/forums/sh...php?p=30493099 ), I decided to update it to enhance stability with my iPhone 14 Pro (which occasionally lost its settings) and to improve some features. Here’s what I did, with some additional details...
I extracted all the files from the reference in this post https://f30.bimmerpost.com/forums/sh...ostcount=11935 My starting point was:
After updating (in the order specified) the MCU with N3MCU_G.bin (extracted from GD-ENB--MCU--20230112) and the ISPBOOOT.BIN (extracted from lcbmw2e_n_EW_B2_1.6.16_n), I ended up with:
Additionally, as an extra, I changed the BMW boot "Logo Image" and "Carplay icon" to my own version, which I'm sharing here if you’re interested:
What I've noticed is:
Last edited by cjescudero; 05-03-2024 at 11:50 PM.. |
05-03-2024, 09:11 AM | #13118 |
New Member
0
Rep 14
Posts |
|
Appreciate
0
|
05-03-2024, 05:50 PM | #13119 | |
New Member
0
Rep 14
Posts |
Quote:
Maybe mega or file.io? Thanks |
|
Appreciate
0
|
05-03-2024, 11:52 PM | #13120 | |
New Member
12
Rep 12
Posts |
Quote:
|
|
Appreciate
0
|
05-04-2024, 05:08 AM | #13121 |
Private
8
Rep 54
Posts |
Hi guys,
Having a problem with my Andream unit for CIC. I cannot get Airplay to work. I switch off the "use car's bt" as it says and I connect to the WIFI of the unit but whenenever I try to screen mirror it shows the airplay device, then it shows cannot connect. Any ideas? Phone is iPhone 15 Pro Max CUST Version: EW_CHL_1.6.14_n MCU Version: 21.7.21.117 HW Version: B_CHL_G |
Appreciate
0
|
05-04-2024, 12:16 PM | #13122 | |
Enlisted Member
9
Rep 35
Posts |
Quote:
|
|
Appreciate
0
|
05-05-2024, 05:26 AM | #13124 | |
Major
215
Rep 1,338
Posts |
Quote:
|
|
Appreciate
0
|
05-05-2024, 01:06 PM | #13125 | |
Private
8
Rep 54
Posts |
Quote:
You have everything like me, except the Cust Version. I asked already Andream to see if they have any updates. In case they give me some updates for CIC, I will attach them here so you can also use them. I am pretty sure you also have the Andream Version. |
|
Appreciate
0
|
05-05-2024, 01:15 PM | #13126 | |
New Member
5
Rep 17
Posts |
Quote:
1. My steering wheel controls work just fine on the car, there is no need for me to code anything, as seen by others, it simply doesn't seem to work with the Android Auto mmi box. 2. I do not have any bluetooth issues. 3. YouTube I never attempted to use, just made an observation that it will likely want to use the AUX instead of the car Bluetooth. I have no desire in loosing audio quality just to use YouTube via the MMI-Box, I'll have alternatives if I need them. Considering the box interfaces with the car, stays on and boots after some time, if you have this installed you WILL see codes in the HU_NBT portion when car is scanned, again, not the end of the world. Just something to keep in mind. |
|
Appreciate
0
|
05-05-2024, 02:33 PM | #13127 | |
Major
215
Rep 1,338
Posts |
Quote:
|
|
Appreciate
0
|
05-05-2024, 04:36 PM | #13128 |
Private
8
Rep 54
Posts |
You just need to connect an iPhone device in the AirPlay menu of the MMI. Also, it says that you have to unselect "Use car's bt phone something" in the setup. I tried today with 3 iPhones, 15 Pro Max, 12 Pro and XR and none of them work so curious to see what Andream says about this.
Regarding your problem, you should send a message to ModsUK to assist you with the updates |
Appreciate
0
|
Yesterday, 03:36 PM | #13129 |
Registered
0
Rep 3
Posts |
Anyone knows where to get the Andream for NBT systems? Im located in Norway and cant seem to find it on AliExpress. Did however find a Andream website, and they also claim to have EU warehouses: https://www.andream-eu.com/product/ewm-bmcp/
Does anyone have any experience with this website? |
Appreciate
0
|
Today, 12:40 PM | #13130 | |
Private
8
Rep 54
Posts |
Did this update and still doesn't work. Maybe I need a new MCU Vers? Can someone help me with the latest one, please?
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
andream, android, android auto, apple, carplay, mmi, retrofit |
|
|