03-19-2021, 08:04 AM | #45 | |
New Member
5
Rep 9
Posts |
Quote:
Would you know what the product code for the extra wires is? Thanks.
__________________
2017 X1 Xdrive 125d, Sport Line, White.
|
|
Appreciate
0
|
03-19-2021, 12:54 PM | #46 |
Private
23
Rep 84
Posts |
1 x 61131391709 (Cable black-violet 0,75MM you need 10 meters)
4 x 12527582688 (Contact bushing MCON 2.8 strand sealing) 4 x 61138366249 (Dummy grommet) 4 x 61138366245 (Single conductor seal) 4 x 12521732592 (Single conductor seal) 2 x 61131393724 (Socket terminal MQS) 4 x 61136931880 (Terminal socket MQS ELA) 2 x 61136992166 (Socket housing , you possibly have this) |
Appreciate
0
|
03-19-2021, 01:59 PM | #47 |
Private
23
Rep 84
Posts |
I just saw in another thread of yours that you have the LED package !!!
So , as for the taillights retrofit ,YOU DON'T NEED the extra wiring. Your mechanic only has to do the appropriate repinning and coding ofcourse! He should have understand this by the way ! |
Appreciate
0
|
03-21-2021, 12:54 PM | #48 | |
New Member
5
Rep 9
Posts |
Quote:
Much appreciated. Will post an update when my mechanic has done the job!
__________________
2017 X1 Xdrive 125d, Sport Line, White.
|
|
Appreciate
0
|
03-29-2021, 07:22 AM | #49 |
New Member
7
Rep 23
Posts |
Has anyone have any info on what is needed for the non led package. I looked at my wire harness and I have the four wires just one wire color is different. So I should be able to order the kit and just re-pin and recode unless I need something else.
|
Appreciate
0
|
03-30-2021, 09:47 AM | #54 |
Private
23
Rep 84
Posts |
This is very strange !!!
The halogen taillights wiring diagram gives 3 wires. In my car , where I have completed the retrofit , were 3 wires as well. Why you have 4 ??? Tihs is the wiring diagram... |
Appreciate
0
|
03-30-2021, 10:48 AM | #55 |
New Member
7
Rep 23
Posts |
I ordered the retro kit and it should be here this Thursday. I will work in it over the weekend and let you know when it's done and works or what trouble I run into. I guess I'll try the re-pin of the wire first. For the four wires maybe do to a US spec ordered and bought in Germany.
|
Appreciate
0
|
03-30-2021, 12:10 PM | #56 |
Private
23
Rep 84
Posts |
Oh yes !!!
It's definetly the US specs ! US spec'ed cars have an extra outer light , I think. So , everything will be much easier for you. You will only have to do the repinning and the coding. |
Appreciate
0
|
04-01-2021, 05:39 PM | #57 |
New Member
7
Rep 23
Posts |
Order the retro tail light kit and come to find out that the harness is different. I have a rectangle plug on the out lights and the new lights have a small square plug. It was back to order the harness so we'll see once it comes if it is the right plug but the inside lights are the same rectangle plug.
|
Appreciate
0
|
04-06-2021, 10:18 AM | #58 |
New Member
5
Rep 9
Posts |
Hi,
Just a quick update following conversion of the orange-looking pre-LCI tail lights to the Led LCI ones. Here is the result: And the bonus is that no coding was necessary.
__________________
2017 X1 Xdrive 125d, Sport Line, White.
|
Appreciate
1
iceman7117.00 |
04-09-2021, 10:17 AM | #60 |
New Member
7
Rep 23
Posts |
Can anyone tell me if this light should be on or not that is circled. It is on both inner tail lights no matter if I have all lights on or just the parking lights but they are off when all lights are off. They also come on when I turn on day time running lights rear. I do not have rear fog light switch on head light switch.
|
Appreciate
0
|
04-09-2021, 01:52 PM | #61 |
Private
23
Rep 84
Posts |
Both your rear fog light and your brake light are always on and this is not normal.
This happens because BDC BODY parameters think you have halogen taillights. In the halogen taillights there is a different mapping. So you have to code your BDC ECU. |
Appreciate
0
|
04-09-2021, 02:32 PM | #62 |
New Member
0
Rep 6
Posts |
Hello,
thank you "jr1979", thanks to your tip I replaced the lamps with a prelift, I only have a question what was wrongly coded because the light bulb burns to ~ 50% with the LED. when I press the stop it lights up ~ 100% Last edited by ThomasWi; 04-18-2021 at 12:17 PM.. |
Appreciate
0
|
04-09-2021, 02:47 PM | #63 |
New Member
7
Rep 23
Posts |
I've coded the tail light from bulb to led and turned off monitoring as it say in past post. I might be missing something somewhere else.
|
Appreciate
0
|
04-10-2021, 01:57 PM | #64 |
Private
23
Rep 84
Posts |
You have to change 4 parameters (2 for each side) in the 3064 and 3065 section of the BDC BODY.
The "mapping" has to be set for the correct function. |
04-18-2021, 10:47 AM | #65 |
Private
23
Rep 84
Posts |
Here you are :
Go to BDC BODY section 3064. MAPPING_STANDL_H1_L_OUTPUT ---> sl_l 3065 MAPPING_STANDL_H2_L_OUTPUT ---> sl_2_l These are for the left light. Do the correspodent setting for the "R"ight light. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|