05-27-2020, 01:58 PM | #683 | |
New Member
1
Rep 16
Posts |
Quote:
Hello, my trunk doesn't close with just one touch on the control, opening it opens with just one touch, can you tell me where I can make it close with just one touch instead of having to hold it to close? Thank you |
|
Appreciate
0
|
05-27-2020, 02:30 PM | #684 |
Private First Class
80
Rep 139
Posts |
Look in the Tailgate function in Bimmercode.
|
Appreciate
0
|
05-28-2020, 05:35 AM | #685 | |
Private
49
Rep 69
Posts |
Quote:
My latest settings are: ECUs → Seat Module Driver (CFAS_PLX_1) → Expert Mode → EINAUSSTIEGSHILFE → Modus_FA_SLV (default: nicht_aktiv) ------------ ECUs → Seat Module Driver (CFAS_PLX_1) → Expert Mode → 3015_0_1_255 → 0x3C (default: 0x3C):EAH_VERFAHRWEG_SLV_PHYS ・ ・ ・ Default 60mm (3C) back distance → 3015_4_5_255 → 0x37 (default: 0x64):EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS ... Change the protection distance from the default 100mm (64) protection to 55mm (37) ------------
__________________
BMW 320d xDrive Touring M Sport(G21) Production Plant: Munich, Production Date: 2021-02-25 |
|
Appreciate
0
|
05-30-2020, 11:56 AM | #686 | |
New Member
1
Rep 16
Posts |
Quote:
Hello, did you manage to make the angel eye get 100% when you turn on the low beam? |
|
Appreciate
0
|
06-08-2020, 11:23 PM | #687 |
New Member
12
Rep 8
Posts |
Does anyone know if it is possible to code the folding of the rear seat backs? Currently the left button in the trunk does the left seat and the middle while the right button does the right seat only, but I would love to flip that so the right button does the right & middle.
|
Appreciate
0
|
06-19-2020, 11:02 AM | #688 |
Captain
678
Rep 910
Posts |
It is an easy change option using Bimmercode. It allows you to change default (in some countries) from On at start-up to “remember last setting”
|
Appreciate
0
|
06-25-2020, 12:45 PM | #689 |
New Member
1
Rep 5
Posts |
Hello to all! Maybe someone can help me. I have a 2018 X1 F48. Basically, all I need is I encoded. But I could not find the encoding for closing the trunk with the remote control.
Always and in almost all cars it was in the HKFM Module: 3010>SCH_FBD set to: aktiv 3010>SCH_TOEHKI set to: aktiv 3010>TASTER_FBD set to: aktiv The problem is that I do not have the HKFM module, but there is HKFM2. But it does not have any of these three meanings. Searched through E-SYS and in parts and as soon as possible. There are no these parameters there. Where to look for them? Or maybe in new models these parameters are called differently? |
Appreciate
0
|
06-25-2020, 04:05 PM | #690 | |
Captain
678
Rep 910
Posts |
Quote:
|
|
Appreciate
0
|
06-26-2020, 01:06 AM | #691 |
New Member
1
Rep 5
Posts |
I am sure. I do BMW coding myself. I know very well how to check it for performance. Therefore, I am surprised that I can not find these functions for encoding.
|
Appreciate
0
|
06-26-2020, 04:50 AM | #692 |
New Member
1
Rep 5
Posts |
Everything went well. Thanks to Almaretto, Steve_M_Sport and Stylefr from another forum.
And so, for the HKFM2 module, a slightly different procedure for the driver’s door button and remote control button: 3008 USER_LOG_HKL_ROCKERSWITCHPOS1 -> HKL_ROCKERSWITCHPOS1_BUTTON_TYPE -> Right click on Werte=02 (second entry under "Ausgelesen"). Choose edit and in the entry box at the bottom of the screen change "02" to "05". It is for the driver’s door button. 300B USER_LOG_HKL_REMOTECONTROLLIFTGATEBUTTON -> HKL_REMOTECONTROLLIFTGATEBUTTON_BUTTON_TYPE -> Change Werte=02 to Werte=05. It is for the remote control button. After coding, it is advisable to let the car fall asleep even for a minute. |
Appreciate
0
|
07-03-2020, 07:03 AM | #693 |
Registered
0
Rep 4
Posts |
Hello,
I want to code the SeatBeltReminder in my BMW-X1 (2019) I use Esys 3.30 and psdzdate 4.24.12 and I see the next ACSM_4i screen: 3000 Gurtwarnung 32 Gurtwarnung_0_0_255 Gurtwarnung_1_1_255 Gurtwarnung_2_2_255 etc So nothing looks like SeatBelt Reminders/Sound OFF: set all to nicht_aktiv 3000>SBR_PreWarning_Fahrer 3000>SBR_PreWarning_Beifahrer 3000>SeatBeltReminder_SBR_Fahrer 3000>SeatBeltReminder_SBR_Beifahrer Any ideas? Thanks, henk Last edited by sambe002; 07-09-2020 at 02:23 AM.. |
Appreciate
0
|
09-14-2020, 04:48 AM | #694 | |
Enlisted Member
17
Rep 45
Posts |
Quote:
|
|
Appreciate
0
|
10-15-2020, 12:24 PM | #696 |
Enlisted Member
3
Rep 30
Posts |
did anyone try this?
HU_NBT_EVO> TELEFON_TELEMATIK_ONLINE 3003> WLAN_STATUS HU_NBT_EVO> TELEFON_TELEMATIK_ONLINE 3003> WLAN_WIFI_DIRECT HU_NBT_EVO> HMI 3000> ENT_MIRACAST HU_NBT_EVO> HMI 3000> ENT_MIRACAST_DISPLAY_SETTINGS HU_NBT_EVO> HMI 3000> ENT_MC_WLAN_STREAM_DMP HU_NBT_EVO> HMI 3000> ENT_MC_WLAN_STREAM_DMP_COVERART HU_NBT_EVO> HMI 3000> ENT_MC_WLAN_STREAM_DMP_VIDEO They say that screen mirroring is activated on a NBT EVO. |
Appreciate
0
|
10-16-2020, 03:43 AM | #697 | |
Enlisted Member
6
Rep 40
Posts |
Quote:
|
|
Appreciate
0
|
01-01-2021, 08:44 AM | #703 | |
Registered
0
Rep 2
Posts |
Quote:
I don't find that option named SbrTWarnDurTr1 on my list. Can you confirm that, this is the one(see attached pictures)? Thank you! |
|
Appreciate
0
|
01-01-2021, 01:54 PM | #704 | |
New Member
1
Rep 16
Posts |
coding my 16 X1 M sport
Quote:
Can any one tell me how to do it will be very appreciate. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|