05-16-2024, 11:54 AM | #1 |
Straight Edge
50
Rep 202
Posts |
FS: Valve Cover + Vent Hose, Tensioner + Idler Pulley
Recently did a lot of preventative maintenance on my F80 and replaced a lot of otherwise good condition parts.
Valve Cover (Part #11127846359) Integrated PCV was 100% fine when removed. Decided to replace the whole valve cover instead of just the gasket. $200 PCV Vent Hose (Part #11127850244) Connects to the valve cover. No cracks, in good condition! $40 Belt Tensioner (Part #11288088632) and Idler Pulley (Part #11288673720) I replaced the belts and decided to replace the tensioner and pulleys at the same time. $100 for both Located in Ajax
__________________
2015 F80 M3 - Black Sapphire
2012 E92 M3 - Frozen Silver Previous: 2013 F10 M5 / 2011 E92 M3 / 2009 E92 328i |
05-21-2024, 01:36 PM | #3 |
Straight Edge
50
Rep 202
Posts |
I didn’t use any special tool! However I removed it from the bottom first (has a torx bolt) and then unclipped it from the valve cover. I did this while it was still warm to the touch so I figure the plastic was less brittle.
__________________
2015 F80 M3 - Black Sapphire
2012 E92 M3 - Frozen Silver Previous: 2013 F10 M5 / 2011 E92 M3 / 2009 E92 328i |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
pcv, pulley, tensioner, valve cover, vent hose |
|
|