Turner BMW 10mm Wheel Spacers With Integrated Hub Extender

jsports007 · 06-22-2017, 09:30 AM

Hi, does anyone know or tried to see if these will fit e9X wheel hubs without issue?

https://www.turnermotorsport.com/p-3...87-m2/?pdk=AQE

Reason I want to try these is I have read a few posts that say the 10mm Macht Shnell spacers can cause some vibrations due to the way the spacer sits on the hub. The Turner one also hides the hub rust from not having center caps on my wheels.

Thanks in advanced for you input.
Jay

SYT_Shadow · 06-22-2017, 09:59 AM

I don't know why it says F8X and F87 only...

becausephilchow · 06-24-2017, 05:22 AM

Maybe the "lip" on the Hub is slightly different between the E9X and F8X. I wouldn't be surprised if there's a slight difference.

E9X "lip" might be a bit larger than the F8X, which allows them to make that cap to go over the lip maybe.

slicer · 06-25-2017, 09:08 AM

The F8x version is definitely different as the hubs differ - do not get those. I have Turner's standard version for the e9x (and other platforms) and it works fine, no problems. I currently have a 10mm spacer on my front hubs. I do recall that certain wheels with less of a hub chamfer can interfere. Test on wheel prior to install, torque lugs with little or no weight on the wheel, and inspect to ensure everything is sitting flush after install.

Denk · 06-26-2017, 12:00 AM

10mm MS and Turner spacers sit flush on OEM wheels. I've never had vibration issues using either.

06-22-2017, 09:30 AM	#1
jsports007 Enlisted Member 7 Rep 43 Posts Drives: F15 X5, F82 M4, I3 Join Date: Jan 2015 Location: Vancouver iTrader: (1)	Turner BMW 10mm Wheel Spacers With Integrated Hub Extender Hi, does anyone know or tried to see if these will fit e9X wheel hubs without issue? https://www.turnermotorsport.com/p-3...87-m2/?pdk=AQE Reason I want to try these is I have read a few posts that say the 10mm Macht Shnell spacers can cause some vibrations due to the way the spacer sits on the hub. The Turner one also hides the hub rust from not having center caps on my wheels. Thanks in advanced for you input. Jay
	Appreciate 0 Tweet Quote

06-22-2017, 09:59 AM	#2
SYT_Shadow ///M Powered for Life 11517 Rep 10,345 Posts Drives: E90M/E92M/M4GTS/M4GT4/X5M Join Date: Sep 2010 Location: Greenwich, CT iTrader: (2)	I don't know why it says F8X and F87 only... __________________ DIY: S65 Rod Bearings E9X PFC Z54 BBK on F8X BK harness bar + seats: fit 6 tires in an M3 do88 Cooling Goodies GTS Twins: GTMore project
	Appreciate 0 Quote

06-24-2017, 05:22 AM	#3
becausephilchow Lieutenant 175 Rep 513 Posts Drives: 08 E90 M3 Join Date: Mar 2014 Location: Hong Kong iTrader: (2)	Maybe the "lip" on the Hub is slightly different between the E9X and F8X. I wouldn't be surprised if there's a slight difference. E9X "lip" might be a bit larger than the F8X, which allows them to make that cap to go over the lip maybe.
	Appreciate 0 Quote

06-25-2017, 09:08 AM	#4
slicer Major General 2747 Rep 6,734 Posts Drives: 'E46 M3 Race Car, '23 X7 Join Date: Jan 2009 Location: Wisconsin - Instagram - @slicer_m iTrader: (39)	The F8x version is definitely different as the hubs differ - do not get those. I have Turner's standard version for the e9x (and other platforms) and it works fine, no problems. I currently have a 10mm spacer on my front hubs. I do recall that certain wheels with less of a hub chamfer can interfere. Test on wheel prior to install, torque lugs with little or no weight on the wheel, and inspect to ensure everything is sitting flush after install. __________________ '23 X7 '04 M3 - Fall Line Motorsports Built Race Car - S65 swap, Dry Sump, Bosch Stand-Alone ECU, Drenth Sequential Trans, MCS 3-Way, Flossmann Wide Body, Brembo Motorsports Brakes, Drexler LSD, BBS E88 Etc. INSTAGRAM - @Slicer_M
	Appreciate 0 Quote

06-26-2017, 12:00 AM	#5
Denk Brigadier General 1006 Rep 3,341 Posts Drives: 2021 X5M Join Date: May 2011 Location: PNW iTrader: (2)	10mm MS and Turner spacers sit flush on OEM wheels. I've never had vibration issues using either.
	Appreciate 0 Quote