They look like they will fit and I dig the concavity. I really like these wheels, I had a set of +22/+22 9.5/10.5 for my E92.
10.5 +32 means that the edge of the wheel will be +6.35mm closer out for the additional width, and +8 for the reduction in offset. That means that you're 14.35mm out, or like running a 15mm spacer on the stock wheel. I suspect a 295 will still fit but it will be pretty close. I know people run +18mm spacers on the rear.
Then again, I know that an 19x11 et40mm with a 295 leaves some roomwhich would be 12.7mm closer. You're less than 2mm further, so they should fit.
That's my napkin math and I'm sticking to it. Anyone try yet?