|
Yellow part is where the clip to slide the air scoops off.
Next in red are your Map and Tmap Sensors that are really a pain to get open. Go read some things about taking it off.. it was VERY hard to get to the one on the right because I couldn't get my hand in there. If you look at the wires that are supplied by the JB4. What you do is slide the grey piece out. Yes it's clipped in there, but there's no way to cheat.. slide the piece out!! Once it moves just a little bit, then you pinch it down/together and wiggle the plug off. Try on the left first.. the one on the right was nearly impossible for me. I ended up using a pick and finally running out of patience so I pried it really hard and it went flying. No idea where it is inside the engine bay..
The wires tuck in nicely, and it looks like the best way is to route this under/beside the air box. You can use a 10mm socket to loosen the bolt and slide the wire under it.
|