|
So I'm getting a few request on our wheel offsets which I don't consider a big secret and I'm too lazy to type the same response so here they are:
Front Wheel: 18x10 +20
Rear Wheel: 18x10 +62
Depending on the camber and/or suspension used in the front, you can go up to +24. This is for the 10" wheel of course. This will not clear the stock fender obviously.
The rear specs will clear. You have to be right on with the offset, there is no room to spare. There is slight rub on the inside fender liner but not on the metal. We run a 285 tire. If you run a smaller size and stretch the tire, it may clear with no issues at all.
It is possible to run a lower offset as low as +57, but you will definitely need to roll the fenders then.
With our current setup, we are not running any spacers or any rolled fender. I sized the offset perfectly I think. The fronts have the flared fender however since a 10" wheel will never fit the stock front fender.
|