Quote:
Originally Posted by mrpingu
Also if you did this via BimmerCode this is not correct for F48, their «Comfort mode»-coding for DRL taillights is incomplete. After turning this on for BimmerCode I always would end up with «lamp mapping failed»-error in the BDC fault memory.
Edit: Unsure now, do you have retrofitted preLCI or LCI taillights?
If you have fitted preLCI taillights, please post all your mapping & PWM values related to taillights. You can use this document as template: https://docs.google.com/spreadsheets...456x__ZQ0/edit TAB: BDC_BODY lampmapping |
Thanks again for your help. I installed pre LCI LED rear lights and did use Bimmercode. VO coding is not known by me. It seems this is more for IT experts. Is this kind of coding also possible in the Bimmercode expert mode?
Since I installed and tested the lights indoors, it is possible that the outer rear lights will work in daylight. But shut off when dark, just like the LED conversion that inlinesix85 descipes earlier in this threat. I will check this tomorrow.