[TakeOne]

Okay Dinan,
Got around to putting the newly released Exhaust for the X1/X2 yesterday.
Cliff Notes:
- Incredibly well packaged! The box arrived in a somewhat questionable condition. (from shipping I'm sure) But EVERYTHING was extremely protected by form fitted foam.
- Build Quality: TOP NOTCH (except for one piece I'll mention later)
- Sound: Just right. A little drone if you're at low speed in a high gear. Specifically 1,300-1,400rpm's, but everywhere else is great. In fact, the higher you go, the more glorious it sounds!

Okay, the not so good…
Instructions, gonna unfortunately have to give an "F". For one, there were none. Atypical from Dinan as they always had a paper copy included when I bought their piggyback and their intake. Okay, no big deal. We'll just go to their website and download instructions. After finding the model number of the exhaust and specifying X-Drive, we noticed something VERY off from their cutting measurements. I mean VERY off. Before taking the blade to the exhaust we just kept re-reading and re-reading. Eventually, we noticed that even though we clicked the link for X-Drive, the link actually re-directed us to the S-Drive PDF. We thought, oh, maybe they accidentally flip flopped the PDF instructions, so we went to the S-Drive instructions. But nope, S-Drive instructions were S-Drive, and the X-Drive link took us to S-Drive.
I ended up calling Dinan, but unfortunately they don't have technical people or engineers working on Saturday. Only sales and returns people were manning the phones. So we had to use a specific exhaust mounting point that both the OEM had, and the new Dinan pipe had, and work are way backwards to ESTIMATE a cutting point.
Short story, it worked, but it took measuring, and measuring, and measuring to make sure we would cut correctly.

Last part: There is a bracket that attaches which is for mounting the actuator flap. After spending more time than we should have, we noticed that the bracket did NOT have the necessary bend that it was suppose to an order to line up with the screw holes. It appears that from your CAD drawing, and Parts photos, it should have had an approximate 30 degree bend so the holes could line up. Mine was completely straight. This left almost a 1" gap.
(see photos attached)
So at this point, we had to figure an on-the-spot solutions, as the stock exhaust was already cut. We ended up using a vice, and in multiple steps, used a vice to bend the bracket in, eventually to where the two screw holes would line up and be flush.

Please don't take this as a bash to the product. It seems like everything else they nailed. I just want Dinan to take this as an opportunity to make these two simple corrections. UPDATE your website with correct links, and double check/or revise that bracket. (and no, i don't believe this was damaged from shipping as i would have noticed a "previous crease" where there should have been.

As always, i've recorded everything from unboxing, instal (issues we ran into) and driving review. Video will be coming in the next several days.