Okay now to put that box by the strut covering the battery. It certainly isn't as easy as the X1, but still not all that hard. You need two pop rivets, just take a screw driver or trim removal tool and pry out the middle, pop it out. There is one on each side. Pull up on the weather stripping and take it all off. Now remove the cowl by pulling it up then out towards you. Take a note it is wedged in between/under the windshield wiper bezel, so make sure it is popped in that way when you put it all together.
Last edited by rice_rocket88; 05-18-2020 at 09:31 PM..
|