View Single Post
      02-21-2019, 06:12 PM   #7
MJE60
Captain
MJE60's Avatar
England
678
Rep
910
Posts

Drives: BMW G01 xDrive M Sport
Join Date: Jan 2019
Location: Dorset, UK

iTrader: (0)

Quote:
Originally Posted by ejw2011 View Post
I have the driver assistance and plus. There is a camera behind the rearview mirror with connected drive logo. Also there is a button below the hazard light button for the warning collision on the center dash.
Hi
@[landrumdh & ejw211

I believed all F48 sold worldwide had/have as a minimum “collision warning with city braking”. This is supported by the KAFAS camera located in the top middle of the windscreen/windshield in front of the rear view mirror. So ALL F48 have the camera. All F48 also have the “driver assist” button on the dash. It is when you push this button that differences are shown. The assist will show which features are installed in the car and allow the driver to select individual functions to be activated/deactivated (temporarily as they reset when the car is restarted).

The ONLY way to tell with certainty which assist features a F48 has is to turn on the ignition and push the “driver assist” button ( the car in a circle button below the hazard triangle button) and see on the central display. Looking at the left hand buttons on the steering wheel may help if you cannot turn on the ignition because only cars with “ driver assistant plus” have 5 buttons & rotary selector. You cannot tell for Cars with driver assist as they have 1 or 3 buttons same as standard cars. Cars is some countries are also required to have their VIN visible (usually on edge of windshield). You can , if you know how, look up the VIN and it will show the build options. F48 with options 5ASA have “driver assist” cars with 5ATA have “da plus” , cars without these options showing will just have std frontal collision warning with braking.

Hope this helps.

Last edited by MJE60; 02-21-2019 at 10:06 PM.. Reason: Avoid confusion, correct errors
Appreciate 0