Not sure if you made any progress with this.
On my f48, the DSC module has the following options:
EPBi ohne Auto-P
Auto-P only
EMF
EPB
EPBi und Auto-P
Handbremse
Under 3009 DSC_FAS_CODIERDATEN, 3C -> Funktionen -> C_Variante_Feststellbremse -> Ausgelesen ->
It's set to EPBi ohne Auto-P (ohne is "without" in german)
I'm curious to try EPBi und Auto-P (und is "and" )
What i'm not sure about is if there are other coding that need to be changed in conjunction with...!
So I'm hesitant to do this, as it does affect the braking of the car. (read safety between the lines)
I'm sure that's why Bimmercode does not read the ecu, let alone allow expert mode...
I've noticed a few modules remove the expert mode function, must be the newer version of the app.
Anybody have any more to add to this?
Cheers,
Quote:
Originally Posted by Funkier
Hello,
I drive an F54 and I also opened the circuit to see the same buttons for autohold. But it did not do anything when I pressed them in combinations as well.
Does anybody know what is the difference with EPBi mit AutoP, ohne AutoP and EMF? These are the types of handbrakes that you can set in FDL coding. Can someone with Auto Hold function enabled check their DSC2 for Handbremsen parameters?
|