|
each MLED takes 35W of power so I made a power cable with 20A fuse to the battery. I also install 2 touch buttons at the driver seat. one of them switches the inner MLED. the other one switch the other modification that I am going to make
Sorry that I didn't take photo of the power cable.
This modification is indeed the was between me and the controller.
and once again Sorry that I am not going to mention about how I am cracking it because I don't want BMW see this and make any meassure to prevent them. I think they just want you to pay more to get better lighting. yes that's reasonable but even adaptive LED (the 4 bulb version) cannot compair with 1 pair of MLED on brightness and width.
what I can tell is
1. The controller has gyrosensor to detect the headlight angle. it has to be sit on the headlight location during testing.
2. the power output of the controller is too small to drive MLED. so external power is needed.
3. the power feeding to the OEM LED chip is a pwm power.
4. the OEM projector has to be kept inside the headlight housing
|