[Glen e]

From another website but this is dead on accurate I’ve done all three in my rear I don’t want any of them up there.You need to look really closely at the plastic button that he’s talking about it’s actually two pieces and you need to split them. Don’t just start yanking underneath the whole button , it won’t move.

“Here is how to do it. I did it on my daughters X2 and it took about 2 minutes. Raise the headrest. Pry off the little round plastic cover by hand on the RH side-the one without the button. It comes off easily, held in by three small tabs. Under that cover is a round metal slot for the headrest bar. On the side with an opening there is a gray metal clip that holds the headrest in place. Take a small screwdriver and pry the clip out (comes out easily). Reinstall plastic cover-snaps in place. Headrest can be removed-or you can put it in and remove it at will, like any other headrest. Rearward vision improved.”