Quote:
Originally Posted by MJE60
Hi
Welcome to the forum and sorry for bad news
The part that would have been fitted at factory for 8.8”/6UP in your car at build date is 65509387451 (non touch).
If you had. Checked realoem or other part checker you will see that the part was
Superseded by:
65506844128 (07/2017 — 08/2018), nonexchangeable retrospectively
65508797400 (03/01/2018 — (08/2019), Exchangeable retrospectively
65508707407 (07/01/2019 — ), Exchangeable retrospectively
65509387451 Exchangeable retrospectively but latest version and usually most expensive
Sadly the part you bought is nonexchangeable retrospectively and is one of the few Entrnav2 touch screens that will not work with your ENTRYNAV HU (which is why they are usually very cheap on eBay). I recommend 8797400 if you can get one but 8707407 or 9387451 would work as well.
https://www.realoem.com/bmw/enUS/select
|
Sorry for hijacking the thread, but
MJE60 since you mentioned it here I have just two questions:
1. Can you install and use a touch display in a 2016 X1 that comes with Entrynav without any extra hardware?
2. Is there some special extra coding needed to be done with bimmercode for the touch screen? or, in my case, since I already coded everything for the 9387451 it should be as simple as swapping the two CIDs?