Quote:
Originally Posted by StefanJ
MJE60, do you know what parameters should be changed with E-sys ? ?
|
Sorry, I no longer have an X1 so am not able to look/check/search for relevant parameters. A possible solution would be to get help from someone who has 2 active door switches like Xorbitman. It would be a case of searching BDC and HU for possible/relevant parameters and checking how they are coded and then comparing to yours (try again with Bimmercode first in expert search “zentral”). I gave a suggestion in earlier post but I can no longer search/check myself and offer suggestions. The modules on my new car are different to the X1.
Final thought, did you actually check the pins on the connector/cable for passenger door switch. I know you said it illuminates so is receiving power but useful to check if it is same as driver door connections (if you have time you may wish to try driver door switch on passenger side and your new switch on driver door - they should plug in but will obviously not fit in door itself).
Best wishes