Quote:
Originally Posted by Raygbmw1
Sorry mate, I’m not familiar with Bimmercode. I use Esys and Rhiengold in my coding and error checking.
In the FA remove the 8TD save it and write the modified FA back to the car. Code (not FDL Code) the ECU listed above and you’ll have the SLI.
If bimmercdoe allows you to modify the FA then it is possible. However, I think Bimmercode and Carly only does FDL coding.
|
Hello everybody,
I removed the 8TD from the FA by using the E-Sys & Launcher PRO. And right-click and code (BDC_BODY, HU_NBT_EVO, KOMBI2, KAFAS2, DSC2, SAS).
(Without SAS, it is possible with 5 modules (BDC_BODY, HU_NBT_EVO, KOMBI2, KAFAS2, DSC2).)
In addition, the Japanese F39 did some FDL codes and activated SLI.
Today, F48 / F39 and BIMMERCODO can't put KAFAS2 into expert mode, so I think E-Sys & Launcher PRO is necessary.
P.S.
7E FSC code is not required.