Quote:
Originally Posted by ///IVI III
They are from ecs tuning, they sell the half set kits of 10. I measured my stud requirement by adding an inch to the wheel centre cap and measuring the distance from existing wheel bolt to get to that 1 inch distance (if that makes sense) the key is knowing the length of your existing wheel bolt and adding from there. Are you using OEM bmw 47mm wheel bolt at the moment?
it helps to sketch it out and make sure you order the lengths you need.
|
Yeah I'm just using OEM bolts right now. I see what you mean, even the stock bolts don't stick out the same front/rear.