Quote:
Originally Posted by varooshgog
I think it is important to note that ProTool CANNOT modify/code certain drivetrain functions like the DCT (i.e. you can’t use it to change DCT software to the GTS or CS variant).
I know some folks want the do it all tool, but may not be worth it if you have a DCT equipped car.
|
That's because the dct isn't codeable, so obviously protool cant code it. I talked to protool and they confirmed this as well = Dcts can only be flashed. So you'll need xhp, or get esys to flash it.
But generally speaking if you can code (code not flash) it on esys you can do it on protool - especially on the older cars (such as the f series) that have been fully mapped out.