Quote:
Originally Posted by ericlr1225
5. I installed FlexFuel kit and ready to give Stage2+ MM a try.
Next I'm planning to run 3 tank E40mix then 1 full tank pump 91gas just to lubricate/clean the fuel system, learned from this forum. Do I need to flash back to 91 tune at gas station or stage2+MM map will auto adjust it. If running just Stage 2+ E30 map only, would flexfuel sensor function still work?
Thanks a lot guys! Cheers!
|
Stg 2+ MM will only drop back down to 93 octane with the FF sensor. You have to use Stg 2 MM to auto adjust down to 91 ACN.
I’d also get the Bend Calibration fuel filter to help protect all the new parts you just put on.